Weller RTPS 002 C X MS 0.2 mm Conical Soldering Iron Tip for use with WXMPS-MS (Smart) Soldering Iron

모든 Soldering Iron Tips 열람하기

Subtotal (1 unit)*

₩89,540.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 11월 09일 부터 8 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩89,540.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
252-8161
Distrelec 제품 번호:
303-44-777
제조사 부품 번호:
T0050110899
제조업체:
Weller
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Weller

Model Number

RTPS 002 C X MS

Tip Shape

Conical

Product Type

Soldering Iron Tip

For Use With

WXMPS-MS (Smart) Soldering Iron

Tip Series

RTPS

Tip Angle

30°

Tip Width

0.2 mm

Standards/Approvals

No

COO (Country of Origin):
MX

Weller Soldering Iron Tip, 0.2mm Tip Width, 30° Tip Angle - T0050110899


This soldering iron tip is a conical replacement tip designed for precision electronics work with compatible smart soldering irons. It delivers a fine-point contact for controlled heat transfer to small components and is intended for professional environments in automation, electrical, mechanical and electronics sectors.

Features and Benefits:


• 30° conical geometry for accurate access to tight joints
• 0.2mm fine point for EXACT solder deposition control
• Conical profile reduces thermal mass for Faster temperature response
• Compatible with MS smart iron systems for quick interchangeability
• Durable tip plating supports consistent wetting and solder flow

Applications


• Suitable for fine-pitch component soldering on densely populated boards
• Ideal for rework of SMD leads and microconnectors
• Used for precision repair work in automation control modules
• Can be used for delicate electrical contacts in sensor assemblies

What type of heat response can I expect during repetitive tasks?


The low thermal mass conical design enables Rapid recovery between joints, maintaining set temperature during short, frequent solder cycles.

How does the tip affect solder wetting and joint formation?


The fine point concentrates heat at the contact area, promoting controlled wetting and minimising solder bridging on small pads.

Is the tip straightforward to replace when worn?


It is designed for simple removal and fitting into compatible smart iron holders, allowing Rapid swap-out without specialised tools.

Which component geometries benefit most from this shape?


Narrow leads, small terminations and tightly spaced pads benefit from the angled conical profile for direct access and precise solder application.

관련된 링크들