Pico Technology Oscilloscope Probe, Active, Differential Type, 200MHz, 1:10
- RS 제품 번호:
- 898-6753
- 제조사 부품 번호:
- TA045
- 제조업체:
- Pico Technology
사용할 수 없음
RS는 더 이상 이 제품을 입고하지 않습니다.
- RS 제품 번호:
- 898-6753
- 제조사 부품 번호:
- TA045
- 제조업체:
- Pico Technology
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Pico Technology | |
| Probe Type | Active, Differential | |
| Attenuation | 1:10 | |
| Bandwidth | 200MHz | |
| Maximum Common Mode Input Voltage | 60V | |
| Number of Probes | 2 | |
| Safety Category Level | CAT I | |
| Safety Category Voltage | ±60V | |
| Safety Category | CAT I ±60V | |
| 모두 선택 | ||
|---|---|---|
브랜드 Pico Technology | ||
Probe Type Active, Differential | ||
Attenuation 1:10 | ||
Bandwidth 200MHz | ||
Maximum Common Mode Input Voltage 60V | ||
Number of Probes 2 | ||
Safety Category Level CAT I | ||
Safety Category Voltage ±60V | ||
Safety Category CAT I ±60V | ||
- COO (Country of Origin):
- TW
Pico Technology Oscilloscope Probe
The Pico Technology TA044 active differential oscilloscope probe is suitable for high-speed measurement applications with a differential measurement range of ±20V and a common-mode range of up to ±60V. It can be used with signal speeds of up to 200MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
Features and Benefits
Bandwidth is DC to 200MHz (-3dB)
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 500Kohm ll7pF each side to ground
Differential range is ±20V
Common mode range is ±60V
Absolute maximum voltage (either input to ground) is ±60V
Swing is ±2V into 50ohm load
Offset (typical) is <±2mV
Noise (typical) is 0.3mV RMS
Source impedance is 50ohm
CMRR (typical) is 80dB at 100Hz and 50dB at 10MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement is 4xAA cells or 6VDC/90mA mains adaptor or regulated 9VDC/40mA mains adaptor
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 500Kohm ll7pF each side to ground
Differential range is ±20V
Common mode range is ±60V
Absolute maximum voltage (either input to ground) is ±60V
Swing is ±2V into 50ohm load
Offset (typical) is <±2mV
Noise (typical) is 0.3mV RMS
Source impedance is 50ohm
CMRR (typical) is 80dB at 100Hz and 50dB at 10MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement is 4xAA cells or 6VDC/90mA mains adaptor or regulated 9VDC/40mA mains adaptor
Applications
Safe measurement in power circuit
Acquisition of low-speed balanced differential signals found in serial communications buses
Telecom measurement
xDSL,
high-speed power measurement and differential transmitter and receiver design.
Acquisition of low-speed balanced differential signals found in serial communications buses
Telecom measurement
xDSL,
high-speed power measurement and differential transmitter and receiver design.
Certifications
IEC-1010.1
IEC-1010.2-031 CAT III
Pollution Degree 2.
IEC-1010.2-031 CAT III
Pollution Degree 2.
관련된 링크들
- Pico Technology Oscilloscope Battery, For Use With TA058 Active Differential Probes, TA045 Active Differential Probes,
- Pico Technology TA058 Oscilloscope Probe, Active, Differential Type, 50MHz, 1:10
- Pico Technology Oscilloscope Probe, Differential Type, 25 MHz, 20:1, 200:1, BNC Connector
- Pico Technology TA112 Oscilloscope Probe, Active Type, 1 GHz, 10:1, BNC Connector
- Pico Technology TA044 Oscilloscope Probe, Differential Type, 70 MHz, 100:1, 1000:1, BNC Connector
- Pico Technology TA043 Oscilloscope Probe, Differential Type, 100 MHz, 10:1, 100, 1, BNC Connector
- Pico Technology TA041 Oscilloscope Probe, Differential Type, 25 MHz, 10:1, 100, 1, BNC Connector
- Pico Technology TETRIS 2500 Series TA223 Oscilloscope Probe, Active Type, 2.5 GHz, 10:1, SMA, BNC Adapter Connector
