Pico Technology TA112 Oscilloscope Probe, Active Type, 1 GHz, 10:1, BNC Connector
- RS 제품 번호:
- 898-6788
- 제조사 부품 번호:
- TA112
- 제조업체:
- Pico Technology
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
- RS 제품 번호:
- 898-6788
- 제조사 부품 번호:
- TA112
- 제조업체:
- Pico Technology
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Pico Technology | |
| Probe Type | Active | |
| Product Type | Oscilloscope Probe | |
| Attenuation | 10:1 | |
| Bandwidth | 1GHz | |
| Connector Type | BNC | |
| Model Number | TA112 | |
| Safety Category Voltage | 20 | |
| Standards/Approvals | EN 610101:2010, WEEE, RoHS, EN 61010031:2002+ A1:2008, EN 613261:2006 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Pico Technology | ||
Probe Type Active | ||
Product Type Oscilloscope Probe | ||
Attenuation 10:1 | ||
Bandwidth 1GHz | ||
Connector Type BNC | ||
Model Number TA112 | ||
Safety Category Voltage 20 | ||
Standards/Approvals EN 610101:2010, WEEE, RoHS, EN 61010031:2002+ A1:2008, EN 613261:2006 | ||
- COO (Country of Origin):
- DE
Pico Technology Oscilloscope Probe, 1GHz Bandwidth, 10:1 Attenuation - TA112
This oscilloscope probe is an Active measurement accessory designed for precision signal acquisition with high-frequency instruments. It connects via a BNC Interface and attenuates signals to facilitate safer and clearer measurements on high-bandwidth scopes. The probe meets multiple industry standards and is intended for laboratory, development and field-test environments where accurate representation of signals up to gigahertz frequencies is required.
Features and Benefits:
• 1GHz bandwidth provides fast signal fidelity for high-frequency work
• 10:1 attenuation reduces input amplitude for scope protection
• BNC connector ensures secure electrical connection to instruments
• Active probe design maintains signal integrity at high speeds
• Low-capacitance topology supports minimal loading on measured circuits
• 10:1 attenuation reduces input amplitude for scope protection
• BNC connector ensures secure electrical connection to instruments
• Active probe design maintains signal integrity at high speeds
• Low-capacitance topology supports minimal loading on measured circuits
Applications
• Suitable for circuit debug on RF and high-speed digital boards
• Used with oscilloscopes requiring reduced input amplitude
• Ideal for validation of high-bandwidth analogue signals
• Can be used for component characterisation in test benches
• Used for lab-based waveform capture during development
• Used with oscilloscopes requiring reduced input amplitude
• Ideal for validation of high-bandwidth analogue signals
• Can be used for component characterisation in test benches
• Used for lab-based waveform capture during development
Which connector type does it use?
It uses a BNC connector for direct attachment to compatible instruments.
How does the attenuation affect measurements?
The 10:1 attenuation lowers measured voltage by a factor of ten allowing higher input voltages to be observed safely while reducing the load presented to the circuit.
What performance limit should users expect at high frequency?
The probe is specified to operate up to 1GHz which defines the upper frequency at which intended signal fidelity is maintained.
What category of probe design is employed?
It employs an Active probe architecture that provides buffering and lower input loading compared with passive types.
Which standards and environmental marks apply to its manufacture?
It is produced in accordance with multiple standards including EN 61010 and EN 61326 and conforms to RoHS and WEEE environmental requirements.
Supplied with
Power supply
관련된 링크들
- Pico Technology TETRIS 2500 Series TA223 Oscilloscope Probe, Active Type, 2.5 GHz, 10:1, SMA, BNC Adapter Connector
- Pico Technology TETRIS 1500 Series TA222 Oscilloscope Probe, Active Type, 1.5 GHz, 10:1, BNC, SMA Adapter Connector
- Pico Technology Oscilloscope Battery, For Use With TA058 Active Differential Probes, TA045 Active Differential Probes,
- Pico Technology TA062 Oscilloscope Probe, Passive Type, 1.5 GHz, 10:1, BNC Connector
- Pico Technology TA058 Oscilloscope Probe, Active, Differential Type, 50MHz, 1:10
- Pico Technology TA189 Oscilloscope Probe, Current Type, 100 kHz, BNC Connector
- Pico Technology TA167 Oscilloscope Probe, Current Type, 20 kHz, BNC Connector
- Pico Technology Oscilloscope Probe, Active, Differential Type, 200MHz, 1:10
