Pico Technology TA058 Oscilloscope Probe, Active, Differential Type, 50MHz, 1:10

모든 Oscilloscope Probes 열람하기
현재 액세스할 수 없는 재고 정보
RS 제품 번호:
898-6769
제조사 부품 번호:
TA058
제조업체:
Pico Technology
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Pico Technology

Probe Type

Active, Differential

Attenuation

1:10

Bandwidth

50MHz

Maximum Common Mode Input Voltage

600V

Model Number p

TA058

Number of Probes

2

Safety Category

600 VV, CAT I ±700V

COO (Country of Origin):
TW

Pico Technology Oscilloscope Probe


The Pico Technology TA058 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 50MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits


Bandwidth is DC to 50MHz (–3dB)
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 1.6Mohm ll7pF each side to ground
Differential range is ±70V (DC + peak AC) or 70VRMS
Maximum differential is ±700 V (DC + peak AC) or 600VRMS
Common mode range is ±700V (DC + peak AC) or 600VRMS
Absolute maximum voltage is ±700V (DC + peak AC) or 600VRMS CAT I
Swing is ±7V into 5Kohm load
Offset (typical) is <±2mV
Noise (typical) is 0.7mVRMS
Source impedance is 50ohm
CMRR (typical) is 95dB at 60Hz and 60dB at 1MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptor

Applications


Safe measurement in power circuit
Acquisition of low speed balanced differential signals found in serial communications buses
Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
Signals in the milliV range from sensors and other instrumentation

Certifications


IEC-1010.1
IEC-1010.2-031 CAT III
Pollution Degree 2

관련된 링크들