Pico Technology TA Series TA043 Oscilloscope Probe, Differential Type, 100 MHz, BNC Connector
- RS 제품 번호:
- 898-6741
- 제조사 부품 번호:
- TA043
- 제조업체:
- Pico Technology
Subtotal (1 unit)*
₩1,235,793.00
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량 | 한팩당 |
|---|---|
| 1 + | ₩1,235,793.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 898-6741
- 제조사 부품 번호:
- TA043
- 제조업체:
- Pico Technology
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Pico Technology | |
| Probe Type | Differential | |
| Product Type | Oscilloscope Probe | |
| Bandwidth | 100MHz | |
| Maximum Common Mode Input Voltage | 700V | |
| Connector Type | BNC | |
| Model Number | TA043 | |
| Number of Probes | 2 | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 1000V | |
| Series | TA | |
| Standards/Approvals | IEC 1010.2 031, IEC 1010.1 | |
| Rise Time | 3.5ns | |
| 모두 선택 | ||
|---|---|---|
브랜드 Pico Technology | ||
Probe Type Differential | ||
Product Type Oscilloscope Probe | ||
Bandwidth 100MHz | ||
Maximum Common Mode Input Voltage 700V | ||
Connector Type BNC | ||
Model Number TA043 | ||
Number of Probes 2 | ||
Safety Category Level CAT III | ||
Safety Category Voltage 1000V | ||
Series TA | ||
Standards/Approvals IEC 1010.2 031, IEC 1010.1 | ||
Rise Time 3.5ns | ||
Pico Technology Oscilloscope Probe
The Pico Technology TA043 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 100MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.
By selecting attenuation ratio 1:10, this oscilloscope probe can measure signals below 70V to get higher resolution and less noise. Otherwise, set the attenuation to 1:100.
Features and Benefits
Bandwidth is DC to 100MHz (–3dB)
Attenuation ratio is 10:1/100:1
Accuracy is ±2%
Input impedance is 4Mohm ll7pF each side to ground
Differential range is (10:1) ±70V (DC + peak AC) or 70VRMS
Maximum differential is (100:1) ±700V (DC + peak AC) or 500VRMS
Common mode range is ±700V (DC + peak AC) or 500VRMS (10:1 & 100:1)
Absolute maximum voltage is ±1000VRMS CATIII (10:1 & 100:1)
Swing is ±7V into 50Kohm load
Offset (typical) is <±5mV
Noise (typical) is 0.9mVRMS
Source impedance is 50
CMRR (typical) is 85dB at 50Hz and 55dB at 1MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement 4xAA cells or 6VDC/200mA mains adaptor or regulated 9VDC/120mA mains adaptor
Applications
Safe measurement in power circuit
Acquisition of low speed balanced differential signals found in serial communication buses
Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
Signals in the milliV range from sensors and other instrumentation
Certifications
IEC-1010.1
IEC-1010.2-031 CAT III
Pollution Degree 2.
관련된 링크들
- Pico Technology TA Series TA044 Oscilloscope Probe, Differential Type, 70 MHz, BNC Connector
- Pico Technology TA Series TA041 Oscilloscope Probe, Differential Type, 25 MHz, BNC Connector
- Pico Technology Oscilloscope Probe, Differential Type, 25 MHz, BNC Connector
- Pico Technology TA189 Oscilloscope Probe, Current Type, 100 kHz, BNC Connector
- Pico Technology TA167 Oscilloscope Probe, Current Type, 20 kHz, BNC Connector
- Pico Technology,Differential Oscilloscope Kit High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc
- Pico Technology Oscilloscope Battery, For Use With TA058 Active Differential Probes, TA045 Active Differential Probes,
- Pico Technology TA058 Oscilloscope Probe, Active, Differential Type, 50MHz, 1:10