Festo MS series 0.01 μm 1/2 in G 12 bar Pneumatic Filter 900L/min max with Automatic, Manual drain

모든 Pneumatic Filters 열람하기

Subtotal (1 unit)*

₩272,760.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 05일 부터 3 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩272,760.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
202-3402
제조사 부품 번호:
MS6-LFM-1/2-ARV-DA
제조업체:
Festo
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Festo

Product Type

Pneumatic Filter

Filtration Size

0.01μm

Port Size

1/2 in G

Connection Thread Standard

G

Drain Type

Automatic, Manual

Series

MS

Seal Material

Nitrile Rubber (NBR)

Maximum Flow Rate

900L/min

Maximum Operating Pressure

12 bar

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

60°C

Standards/Approvals

RoHS, ISO8573-1:2010 (6:8:4), ISO8573-1:2010 (1:7:2)

Model Number

536877

Bowl Material

Polycarbonate

Filter Type

Fibre

COO (Country of Origin):
HU

Festo MS Pneumatic Filter, 1/2 inches Port Size, 0.01 μm Filtration Size - MS6-LFM-1/2-ARV-DA, Numeric Part Number:536877


This pneumatic filter conditions compressed Air for industrial control and automation systems by removing fine particulates and managing condensate disposal. It is designed for installation in pneumatic supply lines where controlled filtration and efficient fluid removal are required, operating across a typical industrial temperature range and compatible with standard G-thread connections.

Features and Benefits:


• 0.01μm Fibre filtration protects sensitive valves and actuators
• 900 L/min maximum flow supports moderate-duty process lines
• 12 bar maximum pressure enables higher-pressure applications
• Automatic drain reduces manual maintenance interventions
• Manual drain option allows controlled servicing when required
• Polycarbonate bowl provides clear Visual condensate inspection

Applications


• Suitable for factory automation pneumatic control cabinets
• Ideal for instrumentation Air supply to pneumatic valves
• Used with Air preparation units in assembly robots
• Can be used for compressed Air conditioning in test rigs
• Used for general-purpose plant Air in mechanical workshops

What materials contact the compressed Air that could affect compatibility?


Seals are MADE from NBR and the bowl is polycarbonate, both selected for common industrial media compatibility and Visual condensate monitoring.

How does the filtration grade relate to downstream component protection?


The 0.01μm Fibre element captures very fine particles and aerosols, reducing wear in precision actuators and preventing contamination of sensitive electrical and pneumatic instruments.

What connection and installation considerations apply to piping?


The unit uses a G-thread port sized at 1/2 in for straightforward integration with standard BSPP pneumatic fittings.

What are the operating temperature limits for stable performance?


The filter is specified for use between -10°C and 60°C to suit typical plant environments and to prevent material stress outside this range.

관련된 링크들