Pico Technology TA167 Oscilloscope Probe, Current Type, 20 kHz, BNC Connector
- RS 제품 번호:
- 898-6804
- 제조사 부품 번호:
- TA167
- 제조업체:
- Pico Technology
Subtotal (1 unit)*
₩539,506.50
재고있음
- 28 개 단위 배송 준비 완료
- 추가로 2026년 5월 13일 부터 16 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩539,506.50 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 898-6804
- 제조사 부품 번호:
- TA167
- 제조업체:
- Pico Technology
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Pico Technology | |
| Product Type | Oscilloscope Probe | |
| Probe Type | Current | |
| Bandwidth | 20kHz | |
| Connector Type | BNC | |
| Model Number | TA167 | |
| Number of Probes | 1 | |
| Safety Category Level | CAT III | |
| Safety Category Voltage | 300V | |
| Standards/Approvals | EN 61010031:2002, CE, EN 610102032:2002, EN 610101:2001 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Pico Technology | ||
Product Type Oscilloscope Probe | ||
Probe Type Current | ||
Bandwidth 20kHz | ||
Connector Type BNC | ||
Model Number TA167 | ||
Number of Probes 1 | ||
Safety Category Level CAT III | ||
Safety Category Voltage 300V | ||
Standards/Approvals EN 61010031:2002, CE, EN 610102032:2002, EN 610101:2001 | ||
TA167 Pico Technology AC/DC Current Probe
The Pico Technology TA167 is a dual-range current probe capable of measuring AC and DC current signals up to 2000A. It has a 2m long coax terminated cable with safety BNC connector. This current clamp allows you to measure up to 2000A without cutting, disconnecting, or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your Pico scope.
Features and Benefits
200A mode for better performance at lower currents
Auto power-down facility to save battery life
Additional screening to reduce noise pickup
Advanced Hall Effect sensors for improved sensitivity
High external field rejection
Power supply is 9V alkaline battery
Bandwidth is 20KHz
Current 2000A
Maximum conductor size 32mm
9V Alkaline battery
Applications
Oscilloscope probes are used with oscilloscopes to enable the signals on the circuits being tested to be connected to the oscilloscope so that signals can be measured. These oscilloscope probes can be found in:
Battery testing with Pico diagnostics software
Relative compression testing
Starter motor testing
Alternator output testing
Hybrid and EV electric motor current
Certifications
EN61010-1:2001
EN61010-2-032:2002
EN61010-031:2002
300V CAT III
Pollution degree 2
관련된 링크들
- Pico Technology TA Series TA044 Oscilloscope Probe, Differential Type, 70 MHz, BNC Connector
- Pico Technology TA Series TA041 Oscilloscope Probe, Differential Type, 25 MHz, BNC Connector
- Pico Technology TA Series TA043 Oscilloscope Probe, Differential Type, 100 MHz, BNC Connector
- Pico Technology TA189 Oscilloscope Probe, Current Type, 100 kHz, BNC Connector
- Pico Technology Oscilloscope Probe, Differential Type, 25 MHz, BNC Connector
- Pico Technology TA150 Oscilloscope Probe, Passive Type, 350MHz, 1:10, BNC Connector
- Pico Technology TA133 Oscilloscope Probe, Passive Type, 500MHz, 1:10, BNC Connector
- Pico Technology TA112 Oscilloscope Probe, Voltage Type, 1 GHz, 10:1, BNC Connector