Pico Technology TA062 Oscilloscope Probe, Passive Type, 1.5 GHz, 10:1, BNC Connector

모든 Oscilloscope Probes 열람하기

Subtotal (1 unit)*

₩814,900.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 1 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩814,900.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
898-6836
제조사 부품 번호:
TA062
제조업체:
Pico Technology
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Pico Technology

Probe Type

Passive

Product Type

Oscilloscope Probe

Attenuation

10:1

Bandwidth

1.5GHz

Connector Type

BNC

Model Number

TA062

Number of Probes

1

Safety Category Voltage

12

Standards/Approvals

RoHS, IEC, WEEE

Rise Time

240ps

COO (Country of Origin):
DE

Pico Technology Oscilloscope Probe, 1.5GHz Bandwidth, 10:1 Attenuation - TA062


This oscilloscope probe is a passive measurement accessory designed for high-frequency signal capture in laboratory and test-bench environments. It connects via a BNC Interface and provides a standard attenuation ratio for interfacing with bench oscilloscopes. Compliance with environmental and safety standards ensures suitability for regulated facilities.

Features and Benefits:


• 1.5GHz bandwidth enables accurate high-frequency signal reproduction
• 10:1 attenuation allows safer scope input scaling
• 240ps rise time supports fast edge transient detection
• Passive probe design requires no external power source
• BNC connector ensures secure, low-loss instrument connection

Applications


• Suitable for high-frequency analogue circuit debugging
• Used with bench oscilloscopes for signal integrity checks
• Ideal for transient response testing of digital lines
• Can be used for validation of RF front-end components
• Used for routine lab measurements in compliance environments

What connector type is used to Interface with instruments?


It uses a BNC Interface to provide a common, low-loss connection.

Which regulatory standards does it meet?


It conforms to RoHS, IEC and WEEE standards for environmental and safety considerations.

How does the probe handle fast edge measurements?


The probe’s 240ps rise time and 1.5GHz bandwidth are matched to capture Rapid signal transitions accurately.

Is the probe Active or passive in operation?


The probe is passive, requiring no external power while providing attenuation for scope inputs.

Note

All the products in this range are supplied for use with instruments with a permanent earth connection.

관련된 링크들