Pico Technology,Differential Oscilloscope Kit High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc

Subtotal (1 unit)*

₩3,603,580.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 4 개 단위 배송 준비 완료
  • 추가로 2026년 9월 30일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩3,603,580.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
136-5309
Distrelec 제품 번호:
300-85-386
제조사 부품 번호:
PicoScope 4444 1000 V CAT III kit
제조업체:
Pico Technology
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Pico Technology

Product Type

Oscilloscope Kit

Model Number

PQ074

For Use With

PicoScope 4444 Differential Oscilloscope

Kit Type

Differential Oscilloscope Kit

Kit Contents

High-Resolution Differential Oscilloscope, Ta271 Single Ended D9-Bnc Adapter, Picoconnect 442 1000 V Cat Iii Passive Differential Voltage Probes X 3

Height

40mm

Length

190mm

Width

170mm

Standards/Approvals

EN 610101:2010, FCC Part 15 Subpart B, EN 613261:2013

Pico Technology Differential Oscilloscope Kit


The Pico Technology PICOSCOPE 4444 1000 V CAT III Kit is a 20Mhz high-resolution differential oscilloscope with three passive differential voltage probes and one TA271 single-ended D9-BNC adaptor. Its intelligent probe interface automatically configures the PicoScope display to probes. The four D9 inputs allow you to make true differential measurements. The 12bit resolution of the PicoScope 4444 offers 16 times as much vertical detail.

The PicoScope 4444 uses specially designed passive voltage probes that have smaller and lighter (or no) interface boxes. The PicoScope 4444 has high-resolution and deep memory and lets you make multiple differential measurements at the same time, while never occupying more than one power socket. Its intelligent probe interface automatically configures the PicoScope display to your probes, so you don’t have to.

Features and Benefits


It has 4 channel device

waveform buffer and navigator Hardware acceleration engine (HAL3)

Deep memory is 256 MS

Up to 400 MS/s sampling rate

High common-mode rejection ratio

Flexible 12 and 14bit resolution

Balanced high-impedance inputs for a low circuit load

Low voltage probe for millivolts to 50V

True differential measurements in high-resolution

FFT spectrum analyser

Intelligent probe interface

High-resolution offers 64x more detail

Applications


Non-ground referenced measurements

Safe probing of single phase and 3-phase voltages and currents

Measuring power drawn by mobile and IoT devices

Hybrid and electric vehicle design

Motor drives and inverters

Certifications


EN 61010-1:2010

EN 61326-1:2013

FCC Part 15 Subpart B

관련된 링크들