Vishay E Type N-Channel Power MOSFET, 6.4 A, 650 V Enhancement, 3-Pin TO-220AB

RS 제품 번호:: 200-6821
제조사 부품 번호:: SIHP690N60E-GE3
제조업체:: Vishay

Vishay E Type N-Channel Power MOSFET, 6.4 A, 650 V Enhancement, 3-Pin TO-220AB

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 pack of 25 units)*

₩54,405.00

추가로 2026년 6월 29일 부터 25 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	한팩당*
25 +	₩2,176.20	₩54,405.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 200-6821
제조사 부품 번호:: SIHP690N60E-GE3
제조업체:: Vishay

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Vishay
	Channel Type	Type N
	Product Type	Power MOSFET
	Maximum Continuous Drain Current Id	6.4A
	Maximum Drain Source Voltage Vds	650V
	Series	E
	Package Type	TO-220AB
	Mount Type	Through Hole
	Pin Count	3
	Maximum Drain Source Resistance Rds	700mΩ
	Channel Mode	Enhancement
	Maximum Power Dissipation Pd	62.5W
	Forward Voltage Vf	1.2V
	Maximum Gate Source Voltage Vgs	30V
	Typical Gate Charge Qg @ Vgs	12nC
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	150°C
	Standards/Approvals	RoHS
	Automotive Standard	No

	모두 선택
	브랜드 Vishay
	Channel Type Type N
	Product Type Power MOSFET
	Maximum Continuous Drain Current Id 6.4A
	Maximum Drain Source Voltage Vds 650V
	Series E
	Package Type TO-220AB
	Mount Type Through Hole
	Pin Count 3
	Maximum Drain Source Resistance Rds 700mΩ
	Channel Mode Enhancement
	Maximum Power Dissipation Pd 62.5W
	Forward Voltage Vf 1.2V
	Maximum Gate Source Voltage Vgs 30V
	Typical Gate Charge Qg @ Vgs 12nC
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 150°C
	Standards/Approvals RoHS
	Automotive Standard No

Document- SIHP690N60E-GE3

Vishay Series E Power MOSFET, 650V Maximum Drain Source Voltage, 6.4A Maximum Continuous Drain Current - SIHP690N60E-GE3

This power MOSFET is a high-voltage N-channel transistor designed for switching and power-management tasks in industrial electronics. It is supplied in a through-hole TO-220AB package suitable for heatsinking, and is intended for engineers working on control, conversion and protection circuits where robust voltage endurance and straightforward mounting are required.

Features and Benefits:

• 650V Vds for high-voltage switching capability • 6.4A continuous drain current enabling moderate load handling • 700mΩ Rds(on) for predictable conduction losses • 12nC typical gate charge for manageable switching energy • 62.5W power dissipation to support thermal design • 150°C maximum junction temperature for elevated-temperature operation

Applications

• Suitable for high-voltage switch-mode power supplies • Ideal for motor drive gate-stage circuits • Used for industrial inverter protection switching • Can be used for power-factor correction stages • Suitable for high-voltage relay and contactor driver circuits

What is the recommended gate voltage range for driving this device?

The device accepts gate voltages up to 30 V, so gate drivers should be chosen to remain within that limit and provide adequate drive for the specified gate charge.

How should thermal management be approached when mounting?

Use a compatible heatsink on the TO-220AB tab and ensure sufficient airflow

account for the 62.5W dissipation rating when calculating temperature rise.

What ambient conditions are acceptable for operation?

The component is specified to operate down to -55°C, while the maximum junction rating is 150°C, so designs must manage junction-to-ambient thermal resistance to stay within those bounds.

Are there considerations for switching losses at high voltage?

With a 12 nC gate charge and 700 mΩ Rds(on), designers should balance gate-drive speed against switching loss, particularly in applications that switch frequently at high Vds.