사용할 수 없음

RS는 더 이상 이 제품을 입고하지 않습니다.

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	onsemi
	Maximum Input Voltage	10 V
	Mounting Type	Through Hole
	Pin Count	7
	Maximum Output Current	650mA
	Dimensions	10.16 x 7.11 x 4.95mm
	Package Type	PDIP
	Input Voltage Range	-0.3 → 10 V
	Minimum Input Voltage	-0.3 V
	Maximum Operating Temperature	+150 °C
	Length	10.16mm
	Width	7.11mm
	Height	4.95mm
	Operating Temperature Range	Maximum of +150 °C
	Output Current Range	650 mA

	모두 선택
	브랜드 onsemi
	Maximum Input Voltage 10 V
	Mounting Type Through Hole
	Pin Count 7
	Maximum Output Current 650mA
	Dimensions 10.16 x 7.11 x 4.95mm
	Package Type PDIP
	Input Voltage Range -0.3 → 10 V
	Minimum Input Voltage -0.3 V
	Maximum Operating Temperature +150 °C
	Length 10.16mm
	Width 7.11mm
	Height 4.95mm
	Operating Temperature Range Maximum of +150 °C
	Output Current Range 650 mA

COO (Country of Origin):: CN

The NCP1076A & NCP1076B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).

Up to 30W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage

onsemi, AC-DC Converter 650mA 7-Pin, PDIP NCP1076ABP100G

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

관련된 링크들