onsemi, AC/DC Converter 1.05 A 78-Pin, PDIP NCP1079BBP130G

모든 AC-DC Converters 열람하기
현재 비가용
RS는 이 제품을 더 이상 판매하지 않습니다.
RS 제품 번호:
178-4343
제조사 부품 번호:
NCP1079BBP130G
제조업체:
onsemi
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

onsemi

Product Type

AC/DC Converter

Maximum Output Current

1.05 A

Pin Count

78

Package Type

PDIP

Automotive Standard

No

Height

3.43 mm

Length

9.37 mm

Maximum Duty Cycle

72 %

Maximum Input Voltage

10 V

Maximum Operating Temperature

150 °C

Minimum Input Voltage

-0.3 V

Minimum Operating Temperature

150 °C

Minimum Output Current

400 mA

Mount Type

Through Hole

Output Power

14 W

Series

NCP1079

Standards/Approvals

No

Supply Current

1.1 mA

Switching Frequency

130 kHz

Topology

Flyback

Width

6.6 mm

COO (Country of Origin):
CN
The NCP1079A & NCP1079B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).

Up to 30W output SMPS design capability

Ability to scale for efficiency or size

Adjust output current protection based on output power demand

Eliminate acoustic noise

Eliminate Aux winding

Provides more robust protection without worrying about the coupling of the aux winding

Improved efficiency at light load / Improved EMI over the entire load

<50mW no Load Power Consumption

Better EMI Signature Over the Entire Operating Range

Enhanced Protection Against too Low or too High Input Voltage

관련된 링크들