STAHLWILLE Torque Tester, 3/8 in Drive, ±1 % Accuracy, 100 Nm Increment
- RS 제품 번호:
- 268-4358
- 제조사 부품 번호:
- 96521022
- 제조업체:
- STAHLWILLE
Subtotal (1 unit)*
₩4,656,600.00
제조사가 재고 비축중
- 2026년 7월 17일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩4,656,600.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 268-4358
- 제조사 부품 번호:
- 96521022
- 제조업체:
- STAHLWILLE
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STAHLWILLE | |
| Product Type | Torque Tester | |
| Digital | No | |
| Drive Size | 3/8 in | |
| Scale Graduations | 100Nm | |
| Accuracy | ±1 % | |
| Minimum Torque - Nm | 2Nm | |
| Maximum Torque - Nm | 100Nm | |
| Standards/Approvals | Can be used as part of a calibration system | |
| 모두 선택 | ||
|---|---|---|
브랜드 STAHLWILLE | ||
Product Type Torque Tester | ||
Digital No | ||
Drive Size 3/8 in | ||
Scale Graduations 100Nm | ||
Accuracy ±1 % | ||
Minimum Torque - Nm 2Nm | ||
Maximum Torque - Nm 100Nm | ||
Standards/Approvals Can be used as part of a calibration system | ||
제외
- COO (Country of Origin):
- DE
Stahlwille Transducer, 100Nm Maximum Torque, 2Nm Minimum Torque - 96521022
This transducer converts applied torque into a measurable mechanical signal for use in calibration and measurement contexts within industrial settings. It is intended for torque assessment on tools and machinery where a non-electronic indication is acceptable, and it integrates into calibration workflows to verify torque delivery across a specified working range.
Features and Benefits:
• ±1% accuracy supports precise comparative measurements
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
• 3/8 inches drive permits use with common torque tools
• Measures from 2Nm to 100Nm for broad task coverage
• Non-digital mechanical output simplifies integration into rigs
• Suitable for inclusion in calibration systems for verification
Applications
• Suitable for bench calibration of hand torque wrenches
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
• Ideal for verification tasks in manufacturing test rigs
• Used for routine torque checks in maintenance departments
• Can be used for torque auditing in assembly lines
What torque range can it assess reliably?
It operates across a minimum of 2Nm up to a maximum of 100Nm, enabling checks from low-torque assemblies to heavier fastening tasks.
How does the drive Interface with existing tools?
The 3/8 inches drive accepts standard sockets and adaptors, allowing direct connection to common torque tools and test fixtures.
Is the device compatible with calibration procedures?
Yes, it is designed to be employed as part of a calibration system to corroborate torque outputs during comparative testing.
Does the transducer produce electronic data?
No, it provides a mechanical, non-digital measurement output suitable for setups that do not require electronic signalling.
관련된 링크들
- STAHLWILLE Torque Tester, 45748 in Drive, ± 1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester, 45748 in Drive, ± 1 % Accuracy, 200 Nm Increment
- STAHLWILLE Torque Tester, 45750 in Drive, ± 1 % Accuracy, 400 Nm Increment
- STAHLWILLE Torque Tester, 3/8 in Drive, ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Digital Torque Tester, 45872 in Drive, 1 % Accuracy
- STAHLWILLE Torque Tester, 45748 in Drive, 0.25% from measured value Accuracy, 20 Nm Increment
- STAHLWILLE Torque Tester, 45748 in Drive, 10 Nm Increment
- STAHLWILLE Torque Tester, 45750 in Drive, 400 Nm Increment