STAHLWILLE Torque Tester, 1/2 in Drive, ± 1 % Accuracy, 200 Nm Increment
- RS 제품 번호:
- 268-4359
- 제조사 부품 번호:
- 96521023
- 제조업체:
- STAHLWILLE
Subtotal (1 unit)*
₩4,656,600.00
제조사가 재고 비축중
- 2026년 7월 17일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩4,656,600.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 268-4359
- 제조사 부품 번호:
- 96521023
- 제조업체:
- STAHLWILLE
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | STAHLWILLE | |
| Digital | No | |
| Product Type | Torque Tester | |
| Drive Size | 1/2 in | |
| Scale Graduations | 200Nm | |
| Accuracy | ± 1 % | |
| Maximum Torque - Nm | 200Nm | |
| Minimum Torque - Nm | 4Nm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 STAHLWILLE | ||
Digital No | ||
Product Type Torque Tester | ||
Drive Size 1/2 in | ||
Scale Graduations 200Nm | ||
Accuracy ± 1 % | ||
Maximum Torque - Nm 200Nm | ||
Minimum Torque - Nm 4Nm | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- DE
Stahlwille Transducer, 200Nm Maximum Torque, 4Nm Minimum Torque - 96521023
This transducer converts applied torque into a measurable signal for industrial test and control environments. Designed for mechanical torque measurement, it interfaces with standard half-inch drive tools to monitor rotational force across a practical working range suitable for production and laboratory settings.
Features and Benefits:
• 1/2in drive compatibility enables direct coupling with common tools
• Measurement span from 4–200 Nm covers light to mid-range tasks
• ±1% accuracy supports tight control in calibration processes
• Analogue output format integrates with legacy instrumentation
• Scale graduations up to 200 Nm assist Visual verification
• Measurement span from 4–200 Nm covers light to mid-range tasks
• ±1% accuracy supports tight control in calibration processes
• Analogue output format integrates with legacy instrumentation
• Scale graduations up to 200 Nm assist Visual verification
Applications
• Suitable for torque validation in assembly automation lines
• Ideal for calibration benches requiring mechanical input coupling
• Used with test rigs for verifying fastener torque profiles
• Can be used for quality control sampling in manufacturing
• Ideal for calibration benches requiring mechanical input coupling
• Used with test rigs for verifying fastener torque profiles
• Can be used for quality control sampling in manufacturing
What minimum torque can be detected accurately by this device?
It reliably senses torque down to 4 Nm, allowing detection of low-torque events in assembly operations.
How is precision expressed for routine measurements?
Precision is specified as ±1% of measured value, providing consistent results for process control.
Which drive format is required to connect tools?
A 1/2in drive Interface is required for direct mechanical connection to compatible sockets and drivers.
Does the output suit digital data acquisition systems?
The unit provides an analogue signal, so it requires an appropriate analogue-to-digital converter for integration with digital acquisition equipment.
관련된 링크들
- STAHLWILLE Torque Tester, 45748 in Drive, ± 1 % Accuracy, 10 Nm Increment
- STAHLWILLE Torque Tester, 45748 in Drive, 0.25% from measured value Accuracy, 20 Nm Increment
- STAHLWILLE Torque Tester, 45748 in Drive, 10 Nm Increment
- STAHLWILLE Torque Tester, 45748 in Drive, 20 Nm Increment
- STAHLWILLE Torque Tester, 45872 in Drive, ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Torque Tester, 45750 in Drive, ± 1 % Accuracy, 400 Nm Increment
- STAHLWILLE Torque Tester, 3/8 in Drive, ± 1 % Accuracy, 100 Nm Increment
- STAHLWILLE Digital Torque Tester, 45748 in Drive, 1 % Accuracy