제조사부품번호

Festo Electric Parallel Gripper Robot Gripper

RS 제품 번호:: 194-267
제조사 부품 번호:: EHPS-20-A-LK
제조업체:: Festo

Festo Electric Parallel Gripper Robot Gripper

Subtotal (1 unit)*

₩4,870,280.00

제조사가 재고 비축중

2026년 9월 28일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩4,870,280.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 194-267
제조사 부품 번호:: EHPS-20-A-LK
제조업체:: Festo

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Festo
	Product Type	Robot Gripper
	Gripper Type	Electric
	End Effector	Parallel
	Number of Fingers	2
	Gripping Force	218N
	Stroke	13 mm
	Standards/Approvals	Zone 21 (UKEX), CRC 1 - Low corrosion stress, EU RoHS Directive, EPL Db (GB), IEC 61010-1, Zone 1 (UKEX), EPL Gb (GB), VDMA24364-B2-L, EU EMC Directive, UK instructions for EMC, LABS (PWIS) conformity, UK RoHS instructions

	모두 선택
	브랜드 Festo
	Product Type Robot Gripper
	Gripper Type Electric
	End Effector Parallel
	Number of Fingers 2
	Gripping Force 218N
	Stroke 13 mm
	Standards/Approvals Zone 21 (UKEX), CRC 1 - Low corrosion stress, EU RoHS Directive, EPL Db (GB), IEC 61010-1, Zone 1 (UKEX), EPL Gb (GB), VDMA24364-B2-L, EU EMC Directive, UK instructions for EMC, LABS (PWIS) conformity, UK RoHS instructions

COO (Country of Origin):: DE

Festo Robot Gripper, 218N Gripping Force, 13mm Stroke - EHPS-20-A-LK, Numeric Part Number: 8103810

This robot gripper is an electric, two-finger parallel end effector designed to perform controlled object handling on automated systems. It delivers a Compact stroke for short-travel gripping tasks and is specified for use where hazardous-area certification and reduced-corrosion materials are required. The device suits integration on industrial robots and automation cells that demand precise, repeatable gripping force and conformity with recognised electrical safety and electromagnetic standards.

Features & Benefits

• 218N gripping force provides high-force handling for heavier components
• Parallel two-finger design offers secure symmetrical clamping for varied shapes
• 13mm stroke enables Compact short-travel pick-and-place operations
• Electric operation removes need for pneumatic supply for simplified integration
• LABS PWIS conformity reduces risk of contamination in sensitive assembly processes

Applications

• Suitable for automated assembly of metal and composite parts requiring strong grip
• Ideal for pick-and-place tasks in explosive-atmosphere production zones
• Used with robotic cells in electronics handling where low-corrosion materials matter
• Can be used for testing rigs that require a Compact parallel end effector
• Used for material transfer in controlled manufacturing lines with EMC constraints

What hazardous-area approvals does it carry for use in classified locations?

It holds certifications for Zone 1 and Zone 21 hazardous atmospheres with applicable EPL Gb and Db designations for use in potentially explosive environments.

How does the gripper address corrosion-sensitive production?

Materials and surface treatments meet a low-corrosion category consistent with CRC 1 and the VDMA24364-B2-L recommendation to limit corrosive influence on handled parts.

Which electromagnetic and environmental directives are considered in its design?

The device conforms to EMC requirements under EU and UK regulations for electromagnetic compatibility and follows RoHS restrictions for restricted substances.

What stroke and finger count should I expect for tight-tolerance tasks?

The mechanism delivers a 13mm actuation range with two opposing fingers arranged in a parallel configuration for repeatable alignment control.