SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 20 mm Double Acting Acting
- RS 제품 번호:
- 757-8667
- 제조사 부품 번호:
- MGPM20TF-20Z
- 제조업체:
- SMC
Subtotal (1 unit)*
₩512,704.00
재고있음
- 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩512,704.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 757-8667
- 제조사 부품 번호:
- MGPM20TF-20Z
- 제조업체:
- SMC
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SMC | |
| Product Type | Pneumatic Guided Cylinder | |
| Bore Diameter | 20mm | |
| Series | MGP | |
| Action Type | Double Acting | |
| Mount Type | Side, Top Mount, Bottom | |
| Maximum Operating Pressure | 1 Mpa | |
| Cushioning Type | Rubber | |
| Guide Type | Slide Bearing | |
| Maximum Piston Speed | 500mm/s | |
| Piston Rod Thread Standard | G | |
| Rod Type | Single | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | No | |
| Height | 58mm | |
| Width | 26mm | |
| Weight | 670g | |
| Length | 73mm | |
| Stroke Length | 20mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SMC | ||
Product Type Pneumatic Guided Cylinder | ||
Bore Diameter 20mm | ||
Series MGP | ||
Action Type Double Acting | ||
Mount Type Side, Top Mount, Bottom | ||
Maximum Operating Pressure 1 Mpa | ||
Cushioning Type Rubber | ||
Guide Type Slide Bearing | ||
Maximum Piston Speed 500mm/s | ||
Piston Rod Thread Standard G | ||
Rod Type Single | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals No | ||
Height 58mm | ||
Width 26mm | ||
Weight 670g | ||
Length 73mm | ||
Stroke Length 20mm | ||
SMC MGP Series Compact Guide Cylinder, 20mm Bore size, 20mm Stroke Length - MGPM20TF-20Z
This Compact guide cylinder provides guided linear motion for automation and mechanical systems where space is limited. It is a double-acting pneumatic actuator designed to deliver controlled lateral guidance alongside axial force, suitable for integration in equipment requiring constrained travel and positional stability.
Features and Benefits:
• 1 MPa maximum operating pressure for robust actuation performance
• 500 mm/s maximum piston speed for fast cycle times
• Rubber bumper on both ends for reduced end-impact wear
• Slide bearing guide type for smooth lateral guidance
• Operates between −10°C and 60°C for varied environmental conditions
• 20mm stroke length enabling short-travel positioning tasks
• 500 mm/s maximum piston speed for fast cycle times
• Rubber bumper on both ends for reduced end-impact wear
• Slide bearing guide type for smooth lateral guidance
• Operates between −10°C and 60°C for varied environmental conditions
• 20mm stroke length enabling short-travel positioning tasks
Applications
• Suitable for pick-and-place mechanisms in automation cells
• Ideal for fixture positioning in electronics assembly
• Used for door or flap actuation in control panels
• Can be used for small-transfer operations in mechanical handling
• Used with inspection jigs requiring repeatable lateral guidance
• Ideal for fixture positioning in electronics assembly
• Used for door or flap actuation in control panels
• Can be used for small-transfer operations in mechanical handling
• Used with inspection jigs requiring repeatable lateral guidance
What mounting orientations are possible for installation?
It supports side, TOP and bottom mounting arrangements to accommodate different machine layouts and constrained spaces.
How is the piston rod configured for attachment?
The actuator uses a single rod with a G-standard thread to accept common end fittings and linkage hardware.
What is the expected mass to consider for dynamic calculations?
The unit has a mass of 0.587 kg which should be included when calculating inertial loads and servo tuning.
How does the guide behave under repeated cycles?
Slide bearings provide consistent lateral support and reduce stick–slip effects for repetitive motion applications.
What external envelope should be allowed for installation clearance?
The nominal external profile measures 73mm in length, 58mm in height and 26mm in width and should be considered when planning assembly space.
Note
May be used with reed switch 161-782, available in most markets.
관련된 링크들
- SMC Pneumatic Guided Cylinder - Series MGP 20mm Bore, MGP Series, 10 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 30 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 50 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 40 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 25mm Bore, MGP Series, 20 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 125 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 75 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 100 mm Double Acting Acting
