SMC Pneumatic Guided Cylinder - 25mm Bore, MGP Series, 20 mm Double Acting Acting
- RS 제품 번호:
- 758-0702
- 제조사 부품 번호:
- MGPM25TF-20Z
- 제조업체:
- SMC
Subtotal (1 unit)*
₩549,180.00
재고있음
- 3 개 단위 배송 준비 완료
- 추가로 2026년 12월 11일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩549,180.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 758-0702
- 제조사 부품 번호:
- MGPM25TF-20Z
- 제조업체:
- SMC
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SMC | |
| Product Type | Pneumatic Guided Cylinder | |
| Bore Diameter | 25mm | |
| Series | MGP | |
| Action Type | Double Acting | |
| Maximum Operating Pressure | 1 Mpa | |
| Cushioning Type | Rubber Bumper | |
| Maximum Piston Speed | 500mm/s | |
| Minimum Operating Temperature | -10°C | |
| Rod Type | Single | |
| Guide Type | Slide Bearing | |
| Piston Rod Thread Standard | G | |
| Maximum Operating Temperature | 60°C | |
| Height | 58mm | |
| Width | 26mm | |
| Weight | 950g | |
| Standards/Approvals | No | |
| Length | 73.5mm | |
| Stroke Length | 20mm | |
| 모두 선택 | ||
|---|---|---|
브랜드 SMC | ||
Product Type Pneumatic Guided Cylinder | ||
Bore Diameter 25mm | ||
Series MGP | ||
Action Type Double Acting | ||
Maximum Operating Pressure 1 Mpa | ||
Cushioning Type Rubber Bumper | ||
Maximum Piston Speed 500mm/s | ||
Minimum Operating Temperature -10°C | ||
Rod Type Single | ||
Guide Type Slide Bearing | ||
Piston Rod Thread Standard G | ||
Maximum Operating Temperature 60°C | ||
Height 58mm | ||
Width 26mm | ||
Weight 950g | ||
Standards/Approvals No | ||
Length 73.5mm | ||
Stroke Length 20mm | ||
- COO (Country of Origin):
- CN
SMC MGP Series Compact Guide Cylinder, 25mm Bore size, 20mm Stroke Length - MGPM25TF-20Z
This Compact guide cylinder is a guided pneumatic actuator designed for precise linear motion in automated systems. It operates as a double-acting unit with an integrated slide bearing to control lateral forces, making it suitable for repetitive positioning tasks in industrial automation and mechanical assemblies.
Features and Benefits:
• 25mm bore provides consistent force for short strokes
• 20mm stroke delivers Compact travel for tight layouts
• Rubber bumper on both ends reduces impact and noise
• Slide bearing guide improves lateral stability during motion
• Rated to 1 MPa to handle moderate pneumatic pressures
• Operates between −10 °C and +60 °C for standard factory conditions
• 20mm stroke delivers Compact travel for tight layouts
• Rubber bumper on both ends reduces impact and noise
• Slide bearing guide improves lateral stability during motion
• Rated to 1 MPa to handle moderate pneumatic pressures
• Operates between −10 °C and +60 °C for standard factory conditions
Applications
• Suitable for pick-and-place routines in assembly lines
• Ideal for guiding small rotary-to-linear transfer mechanisms
• Used for valve actuation in control panels and cabinets
• Can be used for fixture positioning in test rigs
• Used with handling jigs where repeatable short travel is required
• Ideal for guiding small rotary-to-linear transfer mechanisms
• Used for valve actuation in control panels and cabinets
• Can be used for fixture positioning in test rigs
• Used with handling jigs where repeatable short travel is required
What mounting footprint and form factor can I expect?
The actuator presents a Compact rectangular profile with a low overall height and narrow width to fit constrained spaces while providing guided motion.
How quickly can the piston cycle under normal conditions?
The unit supports piston velocities up to 500 mm/s, enabling Rapid short-stroke operations when supplied with appropriate Air flow.
What physical load should I consider for integration?
Its guided rod arrangement and 25mm bore suit lateral load support within the internal guide capacity
refer to system alignment practices to avoid side-loading beyond the design intent.
How heavy is the component for fixture calculations?
The device mass is 0.84 kg, useful for calculating moving mass in dynamic and support design.
What rod and connection details are provided for installation?
The actuator has a single rod with a standard G-thread for straightforward attachment to tooling and links.
Note
May be used with reed switch 161-782, available in most markets.
관련된 링크들
- SMC Pneumatic Guided Cylinder - Series MGP 20mm Bore, MGP Series, 10 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPM25TF 400Z 25mm Bore, MGP Series, 400 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPM25TF 350Z 25mm Bore, MGP Series, 350 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPM20TF 350Z 20mm Bore, MGP Series, 350 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPM20TF 300Z 20mm Bore, MGP Series, 300 mm Double Acting Acting
- SMC Guided Air Cylinders - MGPM20TF 400Z 20mm Bore, MGP Series, 400 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 20mm Bore, MGP Series, 20 mm Double Acting Acting
- SMC Pneumatic Guided Cylinder - 25mm Bore, MGP Series, 75 mm Double Acting Acting
