Siemens SIMATIC Series Bus Connector for Use with SIMATIC DP PROFIBUS

모든 PLC Accessories 열람하기

Subtotal (1 unit)*

₩181,584.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 6 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩181,584.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
264-1231
제조사 부품 번호:
6ES79720BA700XA0
제조업체:
Siemens
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Siemens

Product Type

Bus Connector

Accessory Type

Profibus DP Connector

Series

SIMATIC

For Use With

SIMATIC DP PROFIBUS

IP Rating

IP20

Hazardous Area Certification

No

Standards/Approvals

IEC 81346-2, RoHS, UL

Siemens SIMATIC Series Bus Connector, IP20, Profibus DP Connector Type - 6ES79720BA700XA0


This bus connector provides a Compact Interface for linking PROFIBUS stations to a PROFIBUS bus cable within SIMATIC DP installations. It delivers a right-angled cable exit and supports RS‑485 FastConnect wiring for fieldbus networks up to 12 Mbit/s. The enclosure is silicone‑free and designed for panel or device mounting where a detachable PG socket is not required.

Features & Benefits


• FastConnect insulation displacement reduces wiring time and errors
• Integrated switchable terminating resistor enables inline bus isolation
• 9‑pin sub‑D port simplifies connection to network equipment
• Rated IP20 for protected indoor control‑cabinet environments
• Operates from −25°C to +60°C for typical industrial conditions

**Applications**


• Suitable for connecting distributed I/O modules to PROFIBUS trunks
• Ideal for retrofit of control panels using SIMATIC DP components
• Used with PROFIBUS cable runs requiring 90° cable routing
• Can be used for fieldbus segments needing switchable termination

How does the terminating resistor function during network reconfiguration?


A slide switch activates a built‑in resistor combination

when engaged it isolates the outgoing bus, allowing safe disconnection and reconfiguration without removing the connector.

What cable types does the connector accept for FastConnect?


The contact system accepts two‑core PROFIBUS FastConnect installation cables via integrated insulation displacement contacts, removing the need to strip conductors.

How is mechanical fixation achieved on equipment?


The housing is secured with a screwed joint and includes strain relief to maintain cable retention under mechanical load.

관련된 링크들