Fluke 287 Digital Digital Multimeter True RMS

Subtotal (1 unit)*

₩1,879,468.50

Add to Basket
수량 선택 또는 입력
재고있음
  • 30 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩1,879,468.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
156-724
Distrelec 제품 번호:
176-09-210
제조사 부품 번호:
FLUKE 287/EUR
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Multimeter Type

Digital

Product Type

Multimeter

Model Number

287

Display Type

Digital

Functions Measured

AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature

Maximum DC Voltage Measurement

1kV dc

True RMS

Yes

AC Voltage Accuracy

± 0.4 %

DC Current Accuracy

± 0.05 %

AC Current Accuracy

± 0.6 %

DC Voltage Accuracy

±0.025 %

DC Voltage Resolution

1 μV dc

Maximum Frequency

100kHz

Resistance Measurement Accuracy

±0.05 % rdg

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

55°C

Battery Life

200h

Weight

870.9g

Standards/Approvals

No

Width

102mm

Height

222mm

Length

60mm

Safety Category Level

CAT III, CAT IV

Safety Category Voltage

1000V

Battery Type

AA x 6

제외

COO (Country of Origin):
US

Fluke Multimeter, 0.025% DC Voltage Accuracy, 100kHz Maximum Frequency - FLUKE 287/EUR


This multimeter is a handheld, True RMS logging instrument designed for electronic and electrical measurement and analysis in industrial environments. It captures and graphically presents logged readings on a built-in display, enabling on-site trend inspection without a PC. The unit supports voltage, current, resistance, capacitance, frequency and temperature measurements and is suitable for extended field use with battery operation.

Features & Benefits


• True RMS measurement for accurate readings on non-linear loads
• 100kHz AC bandwidth to capture high-frequency signals
• 0.025% Basic DC accuracy for precision DC voltage assessment
• 10A continuous input with 20A for 30s to handle inrush currents
• Logging memory up to 15,000 events for unattended monitoring
• 50,000-count display with zoomable trend view for Rapid analysis

**Applications**


• Suitable for automation system signal verification and logging
• Ideal for electronics design validation and component testing
• Used for electrical distribution fault-finding and load analysis
• Can be used for temperature profiling of processes and equipment
• Used with power quality assessments up to 100kHz bandwidth

How are recorded readings time-referenced for later review?


Logged entries include a real-time clock timestamp so each measurement can be correlated to clock time for event analysis.

What power source and endurance can I expect during field logging?


The instrument runs on six AA cells and achieves extended battery life of up to 200 hours in logging mode.

How does the device capture fast transients?


It features Peak capture with a 250 μs response to Record short-duration spikes and transients.

Can I remove test lead influence from low-resistance checks?


Yes, a relative mode allows subtraction of test lead resistance to improve low-ohm and capacitance readings.

Supplied with

It comes complete with test leads and alligator clips, so you're set up to tackle most applications.

관련된 링크들