Fluke 175 Digital Digital Multimeter True RMS

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

모든 Multimeters 열람하기

Subtotal (1 unit)*

₩796,420.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 6 개 단위 배송 준비 완료
  • 추가로 다른 지역에서 339 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩796,420.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
394-4470
Distrelec 제품 번호:
176-05-827
제조사 부품 번호:
FLUKE 175
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Product Type

Multimeter

Multimeter Type

Digital

Display Type

Digital

Resistance Resolution

100mΩ

Model Number

175

Functions Measured

AC Current, AC Voltage, Capacitance, Continuity, DC Current, DC Voltage, Diode Test, Frequency, Resistance

Maximum DC Voltage Measurement

1kV dc

Maximum Resistance Measurement

50mΩ

True RMS

Yes

DC Current Accuracy

±1 % rdg + 3 Digits

AC Voltage Accuracy

±1 % rdg + 3 Digits

AC Current Accuracy

±1.5 % rdg + 3 Digits

DC Voltage Accuracy

±0.15 % rdg + 2 Digits

DC Current Resolution

0.01mA dc

AC Voltage Resolution

0.1mV ac

AC Current Resolution

0.01mA ac

DC Voltage Resolution

0.1 mV dc

Maximum Frequency

1kHz

Resistance Measurement Accuracy

±1.5 % rdg + 3 Digits

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

50°C

Battery Life

200h

Weight

420g

Standards/Approvals

No

Width

90mm

Height

43mm

Length

185mm

Safety Category Level

CAT III, CAT IV

Battery Type

Alkaline

Safety Category Voltage

1000V

제외

COO (Country of Origin):
US

Fluke Multimeter, True RMS Capability, 200h Battery Life - FLUKE 175


This handheld multimeter provides precise electrical measurement for field service and bench repair, combining True-RMS acquisition with a clear digital display and Basic diagnostic tools. It is designed for technicians in automation, electronics, electrical and mechanical roles who require accurate AC/DC readings, frequency and capacitance checks, and simple temperature measurements using a supplied bead thermocouple probe.

Features & Benefits


• True-RMS measurement gives accurate readings on non-sinusoidal signals
• DC voltage accuracy of ±0.15% rdg+2 digits supports precision testing
• AC current accuracy of ±1.5% rdg+3 digits enables load verification
• Maximum frequency measurement of 1 kHz allows motor and drive checks
• Resistance resolution down to 50 mΩ assists low-resistance circuit diagnostics
• Alkaline battery operation delivers approximately 200 h for extended field use

**Applications**


• Suitable for commissioning and fault-finding on motor drives
• Ideal for testing control panels and PLC inputs and outputs
• Used for verifying HVAC system sensors and actuators
• Can be used for capacitance and frequency checks on electronic modules
• Used with power distribution inspection to confirm AC/DC voltages

What probes and accessories are supplied for general use?


Standard test leads with 4mm lantern tips and protective cap arrive fitted, and a 9V battery is installed

temperature measurements use the included bead thermocouple probe.

How does the instrument behave with rapidly changing signals?


An analogue-style bargraph updates at a higher rate than the numeric display and a smoothing mode filters Rapid input fluctuations for easier interpretation.

How does it alert when encountering potentially hazardous voltages?


A built-in unsafe-voltage alert notifies the user if measured voltages exceed 30 V, and a test-lead alert warns of lead issues.

What recording and hold functions assist data capture during inspections?


The meter provides display hold, AutoHOLD and a Min–Max–Average recording mode with Min/Max alert to capture transient events.

How is battery and fuse maintenance performed on site?


The design allows battery and fuse replacement without removing the entire case, preserving uptime during routine maintenance.

Supplied with

Fluke 175 True-RMS Digital Multimeter
(1 pair) Test Leads
9V Battery (Installed)
Quick reference guide

관련된 링크들