Fluke 114 Digital Digital Multimeter True RMS

모든 Multimeters 열람하기

Subtotal (1 unit)*

₩363,597.00

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩363,597.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
616-1498
Distrelec 제품 번호:
176-05-413
제조사 부품 번호:
FLUKE-114 EUR
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Multimeter Type

Digital

Product Type

Multimeter

Display Type

Digital

Resistance Resolution

100mΩ

Model Number

114

Functions Measured

AC Voltage, Continuity, DC Voltage, Resistance

Maximum DC Voltage Measurement

600V dc

Maximum Resistance Measurement

40mΩ

True RMS

Yes

DC Voltage Accuracy

±0.5 % rdg + 2 Digits

AC Voltage Accuracy

±1 % rdg + 3 Digits

AC Voltage Resolution

0.1mV ac

DC Voltage Resolution

0.1 mV dc

Maximum Frequency

1kHz

Resistance Measurement Accuracy

±1.5 % rdg + 2 Digits

Minimum Operating Temperature

-10°C

Battery Life

400h

Maximum Operating Temperature

50°C

Weight

550g

Length

46mm

Standards/Approvals

IEC 61010-1, IEC 61010-2-033

Width

84mm

Height

167mm

Safety Category Level

CAT III

Battery Type

Alkaline

Safety Category Voltage

600V

제외

Fluke Multimeter, ±1 % rdg + 3 Digits AC Voltage Accuracy, ±0.5 % rdg + 2 Digits DC Voltage Accuracy - FLUKE-114 EUR


This handheld multimeter provides compact, field-ready measurement for electrical troubleshooting in industrial environments. It performs AC and DC voltage checks, resistance and continuity testing, and captures minimum, maximum and average values to monitor signal variation. The instrument includes low-impedance input to suppress ghost voltages and a backlit display for low-light locations.

Features & Benefits


• True RMS measurement for accurate AC readings up to 1 kHz
• DC accuracy ±0.5%rdg+2 digits for precise voltage checks
• Resistance range down to 40 mΩ to detect low-resistance faults
• Auto selection of AC/DC volts to speed diagnostics
• Min/Max/Average logging to capture transient fluctuations
• 9V alkaline battery delivering 400 h typical runtime

**Applications**


• Suitable for commissioning and fault finding on control panels
• Ideal for maintenance of motors and inverters with variable-frequency drives
• Used for insulation and bonding checks in installation verification
• Can be used for routine site verification of distribution boards
• Used with portable test setups needing ghost-voltage suppression

What display and update behaviour can I expect during measurements?


The meter uses a 6,000-count digital readout with a 33-segment bar graph

numeric updates occur four times per second and the bar graph updates 32 times per second.

How does the device protect against high-energy transients?


It has surge protection rated to withstand 6 kV Peak per the applicable IEC safety parameters for CAT III, 600V environments.

What environmental limits apply for safe operation and storage?


Operating temperature range is -10°C to +50°C and storage range is -40°C to +60°C with specified accuracy maintained between 18°C and 28°C.

What accessories are supplied to start working immediately?


The kit includes insulated test leads, a protective holster and a pre-installed 9V alkaline battery.

Note

For Calibrated Articles - Please note that accuracy is specified for 1 year after calibration, at operating temperatures of 18 °C to 28 °C, with relative humidity at 0 % to 95 %.

관련된 링크들