Infineon HEXFET N-Channel MOSFET, 1.2 A, 60 V Enhancement, 3-Pin SOT-23

RS 제품 번호:: 913-4058
제조사 부품 번호:: IRLML2060TRPBF
제조업체:: Infineon

Infineon HEXFET N-Channel MOSFET, 1.2 A, 60 V Enhancement, 3-Pin SOT-23

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

View bulk pricing options

Subtotal (1 reel of 3000 units)*

₩414,000.00

24,000 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당	릴당*
3000 - 12000	₩138.00	₩412,200.00
15000 +	₩124.00	₩370,800.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 913-4058
제조사 부품 번호:: IRLML2060TRPBF
제조업체:: Infineon

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Infineon
	Product Type	MOSFET
	Channel Type	N
	Maximum Continuous Drain Current Id	1.2A
	Maximum Drain Source Voltage Vds	60V
	Series	HEXFET
	Package Type	SOT-23
	Mount Type	Surface
	Pin Count	3
	Maximum Drain Source Resistance Rds	480mΩ
	Channel Mode	Enhancement
	Minimum Operating Temperature	-55°C
	Typical Gate Charge Qg @ Vgs	0.67nC
	Forward Voltage Vf	1.2V
	Maximum Gate Source Voltage Vgs	-16V, +16V
	Maximum Power Dissipation Pd	1.25W
	Maximum Operating Temperature	150°C
	Width	1.4mm
	Length	3.04mm
	Standards/Approvals	No
	Height	1.02mm
	Automotive Standard	No

	모두 선택
	브랜드 Infineon
	Product Type MOSFET
	Channel Type N
	Maximum Continuous Drain Current Id 1.2A
	Maximum Drain Source Voltage Vds 60V
	Series HEXFET
	Package Type SOT-23
	Mount Type Surface
	Pin Count 3
	Maximum Drain Source Resistance Rds 480mΩ
	Channel Mode Enhancement
	Minimum Operating Temperature -55°C
	Typical Gate Charge Qg @ Vgs 0.67nC
	Forward Voltage Vf 1.2V
	Maximum Gate Source Voltage Vgs -16V, +16V
	Maximum Power Dissipation Pd 1.25W
	Maximum Operating Temperature 150°C
	Width 1.4mm
	Length 3.04mm
	Standards/Approvals No
	Height 1.02mm
	Automotive Standard No

COO (Country of Origin):: PH

Infineon HEXFET Series MOSFET, 60V Maximum Drain Source Voltage, 1.2A Maximum Continuous Drain Current - IRLML2060TRPBF

This MOSFET is a compact N-channel enhancement device intended for low-power switching in surface-mounted circuits. It offers moderate voltage handling and continuous current capacity for use in portable and space-constrained electronic assemblies, operating reliably across an extended temperature range.

Features and Benefits:

• Low Rds(on) of 480mΩ enables reduced conduction losses
• Maximum Vds 60V allows medium-voltage switching applications
• Continuous drain current 1.2A supports modest load currents
• Gate charge Qg 0.67nC enables faster gate-drive transitions
• Power dissipation rating 1.25W limits thermal rise under load
• Gate-source withstand 16V gives margin for drive variation

Applications

• Suitable for DC switch control in battery-powered devices
• Ideal for small motor-driver circuits and load switching
• Used with logic-level drivers for efficient power conversion
• Can be used for signal-level power distribution on PCBs
• Suitable for compact power-management modules in instrumentation

What temperature conditions can it withstand during operation?

It is specified to function down to -55°C and up to 150°C for use in environments with wide thermal variation.

How does the package affect board layout and assembly?

The SOT-23 surface-mount package minimises board footprint and eases automated placement for high-density assemblies.

What electrical stress limits should designers consider for gate drive?

The maximum gate-source voltage is 16V, so gate drivers should remain within this value to avoid over-stressing the gate.

How does its switching behaviour impact thermal management?

With a typical gate charge of 0.67nC and 1.25W power dissipation, duty cycle and switching frequency must be managed to prevent excessive junction heating.