Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V ac, 6A

RS 제품 번호:: 311-2112
제조사 부품 번호:: 1LS244-4C
제조업체:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V ac, 6A

Subtotal (1 unit)*

₩698,607.00

일시적 품절

2026년 6월 08일 부터 74 개 단위 배송
추가로 2027년 5월 24일 부터 54 개 단위 배송
추가로 2027년 5월 31일 부터 25 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩698,607.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 311-2112
제조사 부품 번호:: 1LS244-4C
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Double Break
	Terminal Type	M20
	Switching Current	6A
	Series	LS
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-29°C
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	150°C
	Width	40mm
	Standards/Approvals	CE/EN/IEC
	Length	111.4mm
	Depth	58.5mm
	Hazardous Area Certification	No
	Conduit Entry	20 mm
	Mounting Orientation	Panel

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Double Break
	Terminal Type M20
	Switching Current 6A
	Series LS
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -29°C
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 150°C
	Width 40mm
	Standards/Approvals CE/EN/IEC
	Length 111.4mm
	Depth 58.5mm
	Hazardous Area Certification No
	Conduit Entry 20 mm
	Mounting Orientation Panel

COO (Country of Origin):: GB

Honeywell Series LS Limit Switch, 20mm Conduit Entry, Roller Lever Actuator - 1LS244-4C

This limit switch provides a Compact mechanical sensing solution for position detection in industrial control systems. Designed for panel mounting with a roller lever actuator, it offers reliable signal switching for automation, electronics and electrical installations where robust environmental protection is required.

Features and Benefits:

• SPDT double-break contacts for clear state separation and reduced contact wear
• Rated switching at 240V AC and 6A to handle typical control-circuit loads
• Die-cast zinc housing for Durable mechanical protection in industrial settings
• IP67 ingress rating enabling operation in wet or dusty conditions
• Operating range from −29 °C to 150 °C for elevated-temperature environments
• M20 Terminal with 20mm conduit entry for secure cable termination

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for position sensing on automated valve actuators
• Used for safety interlocks on electrical enclosures in harsh settings
• Can be used for limit detection on machine-tool slides and carriages

How is the device mounted and connected in a control panel?

It is designed for panel-orientation mounting and uses an M20 Terminal with a 20mm conduit entry for conduit or gland attachment.

What electrical switching characteristics should be considered for integration?

The switch provides single-pole double-throw operation with double-break contacts and is specified for switching up to 240V AC at 6 A and up to 250V DC.

What materials and protections ensure suitability for demanding sites?

The enclosure is formed from die-cast zinc and the assembly meets IP67 protection for resistance to dust ingress and temporary immersion.

Which standards apply to its design approvals?

It is manufactured to comply with CE/EN/IEC standards relevant to such switching devices.

Approvals

UL; CSA

Standards

EN60947-5-1, IEC947-5-1