Honeywell HDLS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 10A

RS 제품 번호:: 311-2178
제조사 부품 번호:: LS3A3K-7AA
제조업체:: Honeywell

Honeywell HDLS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 240V ac, 10A

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩1,266,544.50

59 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 5	₩1,266,544.50
6 +	₩1,183,357.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 311-2178
제조사 부품 번호:: LS3A3K-7AA
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	HDLS
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-12°C
	Switching DC Voltage	24V dc
	Maximum Operating Temperature	121°C
	Depth	62mm
	Width	41.1mm
	Length	106.7mm
	Standards/Approvals	CE, CSA, UL
	Hazardous Area Certification	No
	Conduit Entry	PG13.5
	Mechanical Life	50000000Operations
	Operating Force	17.8N

	모두 선택
	브랜드 Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series HDLS
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -12°C
	Switching DC Voltage 24V dc
	Maximum Operating Temperature 121°C
	Depth 62mm
	Width 41.1mm
	Length 106.7mm
	Standards/Approvals CE, CSA, UL
	Hazardous Area Certification No
	Conduit Entry PG13.5
	Mechanical Life 50000000Operations
	Operating Force 17.8N

Honeywell HDLS Series Limit Switch, 10A Switching Current, IP67 - LS3A3K-7AA

This limit switch is a Compact mechanical control device designed for position sensing and safety interlock duties in industrial environments. It operates via a roller lever actuator to detect movement or presence of components and provides a single-pole double-throw switching output for circuit control. The product is built for use where a sealed enclosure, moderate switching capacity and straightforward wiring are required.

Features and Benefits:

• Die-cast zinc housing for robust mechanical protection and durability
• IP67 ingress rating to permit use in wet or dusty conditions
• Snap-action SPDT contacts delivering quick, definitive switching response
• Screw terminals for secure, maintenance-friendly electrical connections
• 10A switching at 240V AC to handle common control loads
• Mechanical endurance rated to 50 million operations for long service life

Applications

• Suitable for end-of-travel detection on conveyor lines
• Ideal for actuator position sensing in fabrication machinery
• Used for interlock control on automated packaging equipment
• Can be used for limit detection on industrial doors and Gates
• Suitable for integration into control panels requiring sealed switches

What conduit entry does it accept for cable installation?

It accepts a PG13.5 conduit entry to accommodate standard industrial conduit glands.

What operating forces and temperatures should installers expect?

The roller lever requires an operating force of 17.8 N and the device is rated to operate between -12°C and 121°C.

What electrical voltages can it switch in DC applications?

The switch is specified for switching at 24V DC for low-voltage control circuits.

How large is the unit for planning panel or machine mounting?

The device measures 106.7mm in length, 41.1mm in width and 62mm in depth to assist layout planning.

What approvals support use in regulated installations?

It carries CE, CSA and UL approvals for suitability in applicable industrial installations.

Approvals

UL; CSA

Standards

EN60947-5-1, IEC947-5-1, AC15, A300 or A600 , DC13, Q300