Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS 제품 번호:: 217-7110
제조사 부품 번호:: 1LS244-4PG
제조업체:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotal (1 unit)*

₩589,329.00

추가로 2026년 5월 25일 부터 36 개 단위 배송
추가로 2026년 6월 01일 부터 28 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩589,329.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 217-7110
제조사 부품 번호:: 1LS244-4PG
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Terminal Block
	Switching Current	10A
	Series	LS
	Switching AC Voltage	240V
	Minimum Operating Temperature	-29°C
	Switching DC Voltage	550V
	Maximum Operating Temperature	+120°C
	Standards/Approvals	UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Length	38.1mm
	Hazardous Area Certification	No
	Mounting Orientation	Panel
	Operating Force	0.51N
	Conduit Entry	PG13.5

	모두 선택
	브랜드 Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Terminal Block
	Switching Current 10A
	Series LS
	Switching AC Voltage 240V
	Minimum Operating Temperature -29°C
	Switching DC Voltage 550V
	Maximum Operating Temperature +120°C
	Standards/Approvals UL file 12252, IEC60947-5-4, EN60947-5-41, CSA file 57325, CE
	Length 38.1mm
	Hazardous Area Certification No
	Mounting Orientation Panel
	Operating Force 0.51N
	Conduit Entry PG13.5

Honeywell Series LS Limit Switch, Side Rotary Actuator Type, Die Cast Zinc Housing - 1LS244-4PG

This limit switch provides positional detection and circuit switching for industrial automation and control systems. It is a compact, side-actuated device designed for demanding environments, offering electrical switching capability for both AC and DC circuits while maintaining ingress protection for use where dust and water resistance are required.

Features and Benefits:

• IP67 ingress protection enables use in wet or dusty locations
• SPDT snap‑action contacts deliver positive, fast switching
• Rated switching current of 10A supports medium‑power loads
• AC switching up to 480V and DC switching up to 550V suits varied supplies
• Low operating force 0.51 N reduces wear on actuating mechanisms
• Terminal Block with NPT conduit entry simplifies field wiring

Applications

• Suitable for limit sensing on conveyor end‑stops
• Ideal for position feedback on industrial valves and actuators
• Used with motor control panels for safety interlocks
• Can be used for door‑open/closed detection in enclosures
• Suitable for packaging machinery position monitoring

What materials make the enclosure Durable for industrial use?

The housing is die‑cast zinc, providing mechanical robustness and resistance to impact in factory settings.

How does the actuator Interface with mounting or linkage arrangements?

The unit uses a side rotary actuator type, allowing shaft or lever linkage to engage at a right angle to the switch body.

Which standards or approvals does it meet for safety and interoperability?

It conforms to IEC 60947‑5‑4 and EN 60947‑5‑41 and is listed under UL file 12252 and CSA file 57325 for recognised industrial use.

What Terminal and conduit options are available for electrical entry?

It employs a Terminal Block termination and accepts 0.5 to 14 NPT conduit entry for secure cable routing.

What thermal limits should be observed during installation?

The operating temperature range spans from −30 °C to 150 °C, requiring attention to ambient and enclosure temperatures during placement.