Honeywell LS Series Side Roller Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 480V, 10A

RS 제품 번호:: 854-1663
제조사 부품 번호:: 6LS2-L
제조업체:: Honeywell

Honeywell LS Series Side Roller Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 480V, 10A

Subtotal (1 unit)*

₩774,988.50

추가로 2026년 5월 25일 부터 6 개 단위 배송
추가로 2026년 6월 01일 부터 10 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩774,988.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 854-1663
제조사 부품 번호:: 6LS2-L
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Side Roller
	Product Type	Limit Switch
	Contact Configuration	SPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	10A
	Terminal Type	Screw
	Series	LS
	Switching DC Voltage	230V
	Minimum Operating Temperature	-29°C
	Switching AC Voltage	480V
	Maximum Operating Temperature	+120°C
	Width	40mm
	Standards/Approvals	RoHS, CSA, UL
	Length	104mm
	Depth	64mm
	Hazardous Area Certification	No
	Mounting Orientation	Side
	Conduit Entry	0.5-14 NPT
	Operating Force	0.34Nm

	모두 선택
	브랜드 Honeywell
	Actuator Type Side Roller
	Product Type Limit Switch
	Contact Configuration SPDT
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 10A
	Terminal Type Screw
	Series LS
	Switching DC Voltage 230V
	Minimum Operating Temperature -29°C
	Switching AC Voltage 480V
	Maximum Operating Temperature +120°C
	Width 40mm
	Standards/Approvals RoHS, CSA, UL
	Length 104mm
	Depth 64mm
	Hazardous Area Certification No
	Mounting Orientation Side
	Conduit Entry 0.5-14 NPT
	Operating Force 0.34Nm

Honeywell Series LS Limit Switch, Side Roller Actuator, IP67 - 6LS2-L

This limit switch is a Compact mechanical device designed to detect and control linear or rotary motion within industrial control systems. It uses a side-mounted roller actuator to convert physical movement into an electrical signal for control circuits and is intended for environments where a small footprint and robust enclosure are required.

Features and Benefits:

• Die-cast zinc housing provides robust corrosion resistance and longevity
• IP67 protection allows use in wet or dusty conditions
• SPDT snap-action contact offers reliable single-pole switching performance
• Operates between -29°C and 71°C to suit varied thermal environments
• 0.5–14 NPT conduit entry simplifies secure electrical connection
• Side mounting permits versatile installation in constrained spaces

Applications

• Suitable for position sensing on conveyor guide rails
• Ideal for limit detection on industrial packaging machinery
• Used with automated Gates and doors for end-of-travel control
• Can be used for safety interlocks on assembly-line equipment
• Suitable for retrofit sensing in existing mechanical systems

What mounting orientation does it require for correct operation?

It is designed for side mounting, so the actuator and switch body are installed laterally relative to the target movement.

How does the contact arrangement affect control wiring?

The single-pole double-throw contact allows one common Terminal to switch between two circuits, enabling simple changeover or signalling configurations.

Which approvals indicate conformity to recognised standards?

The device holds approvals from RoHS, CSA and UL, demonstrating compliance with hazardous substance limits and recognised safety/test standards.

What actuator form factor should be selected for rolling contacts?

A side roller actuator is fitted to Interface with moving parts that provide linear or tangential contact, reducing friction and wear.

How Compact is the unit for tight installations?

The device offers a Compact profile with a small depth and reduced length to suit confined mounting locations.

Approvals

UL, CSA.