Honeywell LS Series Wobble Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A, 5 A

RS 제품 번호:: 217-7113
Distrelec 제품 번호:: 301-38-507
제조사 부품 번호:: 208LS1-4
제조업체:: Honeywell

Honeywell LS Series Wobble Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A, 5 A

Subtotal (1 unit)*

₩496,762.50

추가로 2026년 5월 25일 부터 7 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩496,762.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 217-7113
Distrelec 제품 번호:: 301-38-507
제조사 부품 번호:: 208LS1-4
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Actuator Type	Wobble
	Product Type	Limit Switch
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	10, 5A
	Terminal Type	Screw
	Series	LS
	Minimum Operating Temperature	-29°C
	Switching DC Voltage	550V dc
	Switching AC Voltage	240V
	Maximum Operating Temperature	+71°C
	Width	49mm
	Standards/Approvals	CE, CSA file 57325, EN60947-5-41, IEC60947-5-4, UL file 12252
	Length	77.3mm
	Hazardous Area Certification	No
	Operating Force	1.39N
	Conduit Entry	0.5 to 14 NPT

	모두 선택
	브랜드 Honeywell
	Actuator Type Wobble
	Product Type Limit Switch
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 10, 5A
	Terminal Type Screw
	Series LS
	Minimum Operating Temperature -29°C
	Switching DC Voltage 550V dc
	Switching AC Voltage 240V
	Maximum Operating Temperature +71°C
	Width 49mm
	Standards/Approvals CE, CSA file 57325, EN60947-5-41, IEC60947-5-4, UL file 12252
	Length 77.3mm
	Hazardous Area Certification No
	Operating Force 1.39N
	Conduit Entry 0.5 to 14 NPT

Honeywell Series LS Limit Switch, 480V Switching AC Voltage, Die Cast Zinc Housing - 208LS1-4

This limit switch is a Compact position-sensing device intended for industrial control and automation tasks where robust electrical switching and environmental protection are required. It uses a wobble-type actuator to detect motion or position changes and provides a single-pole double-throw contact arrangement suitable for control circuits in electrical, mechanical and electronic systems.

Features and Benefits:

• SPDT snap-action contact delivers quick state change for control responsiveness
• IP67-rated enclosure protects against dust and temporary immersion
• Die-cast zinc housing offers mechanical resilience in industrial settings
• Switching capability up to 480V AC and 550V DC supports high-voltage circuits
• Operating temperature range to 120 °C permits use in elevated-temperature environments
• Screw-terminal connections allow secure, serviceable wiring

Applications

• Suitable for conveyor end-of-travel detection in material-handling systems
• Ideal for machine-tool position sensing in metalworking equipment
• Used with safety interlocks where environmental sealing is required
• Can be used for limit detection in hydraulic or pneumatic actuators
• Suitable for control panels requiring high-voltage switching capacity

What electrical current range can the switch handle for control loads?

It is rated for switching currents between 5A and 10 A, enabling use with moderate control and load circuits.

How is conduit connection accommodated for field wiring?

The device accepts 0.5 to 1⁄4 NPT conduit entries to suit common industrial conduit sizes and simplify installation.

What type of actuation force is required to operate the mechanism?

The actuator requires an operating force of 0.51 N, allowing it to respond to light mechanical movement.

Which Terminal and contact characteristics aid maintenance and replacement?

It uses screw-type terminals for straightforward wiring and SPDT snap-action contacts for predictable electrical performance.

What standards and approvals apply to the device for regulatory considerations?

It carries CE marking and certifications referenced under CSA file 57325 and UL file 12252 and conforms to EN 60947-5-4 and IEC 60947-5-4.