Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

RS 제품 번호:: 217-7112
제조사 부품 번호:: 201LS1-4
제조업체:: Honeywell

Honeywell LS Series Roller Lever Limit Switch, SPDT, IP67, Die Cast Zinc Housing, 240V, 10A

Subtotal (1 unit)*

₩658,086.00

추가로 2026년 5월 25일 부터 15 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩658,086.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 217-7112
제조사 부품 번호:: 201LS1-4
제조업체:: Honeywell

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Honeywell
	Product Type	Limit Switch
	Actuator Type	Roller Lever
	IP Rating	IP67
	Contact Configuration	SPDT
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Terminal Type	Screw
	Switching Current	10A
	Series	LS
	Switching AC Voltage	240V
	Minimum Operating Temperature	-29°C
	Maximum Operating Temperature	+71°C
	Depth	30mm
	Length	77.3mm
	Standards/Approvals	RoHS
	Width	49mm
	Hazardous Area Certification	No
	Conduit Entry	20 mm
	Operating Force	0.51Nm
	Mechanical Life	10000000Cycles
	Mounting Orientation	Side

	모두 선택
	브랜드 Honeywell
	Product Type Limit Switch
	Actuator Type Roller Lever
	IP Rating IP67
	Contact Configuration SPDT
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Terminal Type Screw
	Switching Current 10A
	Series LS
	Switching AC Voltage 240V
	Minimum Operating Temperature -29°C
	Maximum Operating Temperature +71°C
	Depth 30mm
	Length 77.3mm
	Standards/Approvals RoHS
	Width 49mm
	Hazardous Area Certification No
	Conduit Entry 20 mm
	Operating Force 0.51Nm
	Mechanical Life 10000000Cycles
	Mounting Orientation Side

Honeywell Limit Switch, 20mm Conduit Entry, Die Cast Zinc Housing - 201LS1-4

This limit switch provides mechanical position detection for industrial automation and control systems, using a roller lever actuator to sense movement and trigger electrical changeover. It is designed for side mounting in machinery and equipment where a robust, Compact switching device is required, offering environmental protection suitable for exposed installations.

Features and Benefits:

• SPDT snap action contact for clear changeover signalling
• Rated switching current of 10A for heavy load switching
• Switching AC voltage capability up to 480V for mains applications
• IP67 ingress protection enabling use in wet environments
• Mechanical endurance of 10 million cycles for long service intervals
• Screw terminals that permit secure field wiring connections

Applications

• Suitable for end-of-travel detection on conveyor systems
• Ideal for position sensing on industrial presses and actuators
• Used with packaging machinery for cycle counting and safety interlocks
• Can be used for limit detection in material handling equipment

What enclosure material helps withstand industrial wear?

The housing is constructed from die-cast zinc, providing a hard-wearing Shell that copes well with impact and repeated mechanical interaction.

What temperature range is acceptable for reliable operation?

The unit operates reliably between -10°C and 80°C, allowing deployment in many ambient industrial environments without performance degradation.

How is conduit access arranged for wiring entry?

A 20mm conduit entry is provided to accommodate standard conduit fittings for protected cable routing.

Which mounting orientation is supported for actuator alignment?

The design supports side mounting to position the roller lever for optimal actuation by moving parts.

Are there any relevant approvals affecting suitability for OEM installation?

The switch conforms to RoHS standards, indicating restriction of certain hazardous substances in its construction.