Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 240 V ac-Rated Relay

모든 Level Controllers 열람하기

Subtotal (1 unit)*

₩306,308.40

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 2월 23일 부터 7 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩306,308.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
240-9011
제조사 부품 번호:
MK9151.11 2-450kOhm AC220-240V
제조업체:
Dold
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Dold

Number of Inputs

1

Product Type

Liquid Level Relay

Probe Voltage

10V ac

Overall Length

82mm

Mount Type

DIN Rail

Overall Depth

99 mm

Response Time

20s

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

60°C

Terminal Type

Clamp

Maximum Supply Voltage

240V ac

IP Rating

IP20

Standards/Approvals

CE

Overall Width

22.5mm

Hazardous Area Certification

No

Series

MK 9151N

Current Rating

5 A

Input Type

Voltage

Output Type

Relay

Number of Outputs

5

COO (Country of Origin):
DE

Dold Level Relay


The Dold MK9151 series liquid level relay is a single input and DIN rail mount device. It monitors and controls conductive liquids and powders, example maximum and minimum fill level, protection against overfilling and dry running. The 3-probe connections for 2-point and 1-point level control. It has 220VAC to 240VAC supply voltage. General resistance monitoring, example recording temperature limits with PTC (device to IEG 255, VDE 0435 section 303). This device is straightforward to install and safe to use.

Features and Benefits


High interference resistance of the measuring circuit, which is isolated from the mains

Maximum wire length to the probes is 1500m

Large setting range between 2kohm and 450kohm which permits differentiation between fluid and foam

Adjustable response and release time delay: 0.2seconds to 20seconds

Programmable for open circuit operation (without bridge) or closed circuit operation(bridge X1-X2 or X1-COM)

Green LED for operation

Yellow LED for contact position

1 or 2 changeover contacts

Also available with a sealable transparent cover

Applications


Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media and designed specifically to provide for the: Monitoring and control of liquid levels

Protection of pumps against dry running

Ability to detect liquid leaks in a system

Control of media mixing ratios

Control of liquid levels

General resistance monitoring tasks, e. G. limit temperature detection with PTC

Certifications


IEC/EN 60 255

DIN VDE 0435-303

IEC/EN 61 140

IEC/EN 60 947-1

CSA approval

IP40 rated

관련된 링크들