Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V dc-Rated Relay
- RS 제품 번호:
- 240-9005
- 제조사 부품 번호:
- MK9151.11 2-450kOhm DC24V
- 제조업체:
- Dold
Subtotal (1 unit)*
₩200,163.60
재고있음
- 추가로 2026년 2월 23일 부터 7 개 단위 배송
- 추가로 2026년 3월 16일 부터 4 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 + | ₩200,163.60 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 240-9005
- 제조사 부품 번호:
- MK9151.11 2-450kOhm DC24V
- 제조업체:
- Dold
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Dold | |
| Product Type | Liquid Level Relay | |
| Number of Inputs | 1 | |
| Probe Voltage | 10V ac | |
| Overall Length | 82mm | |
| Mount Type | DIN Rail | |
| Response Time | 20s | |
| Overall Depth | 99 mm | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Terminal Type | Clamp | |
| Maximum Supply Voltage | 24V dc | |
| IP Rating | IP20 | |
| Overall Width | 22.5mm | |
| Standards/Approvals | CE | |
| Hazardous Area Certification | No | |
| Input Type | Voltage | |
| Current Rating | 4 A | |
| Output Type | Relay | |
| Series | MK 9151N | |
| Number of Outputs | 2 | |
| 모두 선택 | ||
|---|---|---|
브랜드 Dold | ||
Product Type Liquid Level Relay | ||
Number of Inputs 1 | ||
Probe Voltage 10V ac | ||
Overall Length 82mm | ||
Mount Type DIN Rail | ||
Response Time 20s | ||
Overall Depth 99 mm | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Terminal Type Clamp | ||
Maximum Supply Voltage 24V dc | ||
IP Rating IP20 | ||
Overall Width 22.5mm | ||
Standards/Approvals CE | ||
Hazardous Area Certification No | ||
Input Type Voltage | ||
Current Rating 4 A | ||
Output Type Relay | ||
Series MK 9151N | ||
Number of Outputs 2 | ||
- COO (Country of Origin):
- DE
MK 9151 - level relay
The MK9151 is used for
Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry running
Monitoring and control of the mix ratio for conductive liquids
General resistance monitoring, e.g. recording temperature limits with PTC (device to IEG 255, VDE 0435 section 303)
Features
3 electrode connections for 2-point and 1-point level control
The metering circuit galvanically isolated from the mains is immune from high levels of interference
Max. lead length to the electrodes: 1500 m
Wide setting range: 2 → 450 kΩ which enables differentiation between liquid and foam
Adjustable response and fallback delay: 0.2 → 20 s
Programmable for working current principle (without bridge) or rest current principle (X1-X2 and/or X1-COM bridge)
2 LEDs to indicate operating readiness and contact position
1 changer
Overall width 22.5 mm, protection class IP40
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.
Application Examples
Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:
Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
관련된 링크들
- Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V-Rated Relay
- Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 240 V ac-Rated Relay
- Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 230 V ac-Rated Relay
- Dold Level Monitoring Relay, DIN Rail
- Dold Insulation Monitoring Relay, 1, 3 Phase, DPDT, 0 → 500V ac, DIN Rail
- Dold Relay Filter
- Dold Insulation Monitoring Relay, 1, 3 Phase, SPDT, 0 → 500V ac, DIN Rail
- ABB CM-ENE MIN Series Liquid Level Relay -, Screw, DIN Rail, Snap-On 24 V-Rated Relay