제조사부품번호

Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V dc-Rated Relay

RS 제품 번호:: 465-0766
제조사 부품 번호:: MK9151N.12 2-450kOHM DC24V 0.2-20s
제조업체:: Dold

Dold MK 9151N Series Liquid Level Relay -, DIN Rail 1 Voltage Input 24 V dc-Rated Relay

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩285,854.00

재고있음

4 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩285,854.00
5 +	₩273,314.40

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 465-0766
제조사 부품 번호:: MK9151N.12 2-450kOHM DC24V 0.2-20s
제조업체:: Dold

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Dold
	Product Type	Liquid Level Relay
	Number of Inputs	1
	Probe Voltage	10V ac
	Overall Length	90mm
	Mount Type	DIN Rail
	Overall Depth	98 mm
	Response Time	20s
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Terminal Type	Clamp
	Maximum Supply Voltage	24V dc
	IP Rating	IP20, IP40
	Overall Width	22.5mm
	Standards/Approvals	IEC, CE
	Hazardous Area Certification	No
	Series	MK 9151N
	Input Type	Voltage
	Number of Outputs	2
	Output Type	Relay
	Current Rating	4 A

	모두 선택
	브랜드 Dold
	Product Type Liquid Level Relay
	Number of Inputs 1
	Probe Voltage 10V ac
	Overall Length 90mm
	Mount Type DIN Rail
	Overall Depth 98 mm
	Response Time 20s
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Terminal Type Clamp
	Maximum Supply Voltage 24V dc
	IP Rating IP20, IP40
	Overall Width 22.5mm
	Standards/Approvals IEC, CE
	Hazardous Area Certification No
	Series MK 9151N
	Input Type Voltage
	Number of Outputs 2
	Output Type Relay
	Current Rating 4 A

Datasheet - IL9151

COO (Country of Origin):: DE

MK 9151N - level relay

Application

Level monitoring and control of conductive liquids and powders, e.g. maximum and minimum fill level, protection against overfilling and dry running

Monitoring and control of the mix ratio for conductive liquids

General resistance monitoring tasks, e.g. recording temperature limits with PTC

Contact protection relay with delay

Features

3 electrode connections for 2-point and 1-point level control

Measuring circuit for electrodes works on AC voltage generated internally in the device (approx. 30 Hz); therefore no electrolysis occurrence in the fluid

The measuring circuit galvanically isolated from the mains is immune from high levels of interference

Max. lead length to the electrodes: 3000 m

Wide setting range: 2 kΩ → 450 kΩ which enables differentiation between liquid and foam

Response and fallback delay: 0.2 s → 20 s, adjustable separately for MIN and MAX level

Programmable for operating or rest current principle

LEDs to indicate operational readiness and contact position

Output contact 2 changeovers

Overall width: 22.5 mm

Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.

Application Examples

Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:

Monitoring and control of liquid levels

Protection of pumps against dry running

Ability to detect liquid leaks in a system

Control of media mixing ratios

Control of liquid levels

Approvals

Standards

IEC/EN 60 255, DIN VDE 0435-303