제조사부품번호

Fluke Networks VISIFAULT Single & Multimode

RS 제품 번호:: 540-8308
Distrelec 제품 번호:: 176-52-890
제조사 부품 번호:: VISIFAULT
제조업체:: Fluke Networks

Fluke Networks VISIFAULT Single & Multimode

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩1,096,524.00

제한된 재고

추가로 2026년 5월 18일 부터 5 개 단위 배송
추가로 2026년 5월 21일 부터 7 개 단위 배송
추가로 2026년 6월 11일 부터 6 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 - 4	₩1,096,524.00
5 +	₩1,063,647.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 540-8308
Distrelec 제품 번호:: 176-52-890
제조사 부품 번호:: VISIFAULT
제조업체:: Fluke Networks

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke Networks
	Product Type	Fibre Tester
	Cable Type	Single & Multimode
	Connector Type	Single Port
	Operation Test Distance	4km
	Wavelength	650nm
	Battery Type	2 x AA
	Battery Life	80h
	Height	157mm
	Weight	180g
	Standards/Approvals	IEC, ISO
	Width	37mm
	Power Source	Battery
	Length	52mm
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	40°C
	Model Number	VISIFAULT

	모두 선택
	브랜드 Fluke Networks
	Product Type Fibre Tester
	Cable Type Single & Multimode
	Connector Type Single Port
	Operation Test Distance 4km
	Wavelength 650nm
	Battery Type 2 x AA
	Battery Life 80h
	Height 157mm
	Weight 180g
	Standards/Approvals IEC, ISO
	Width 37mm
	Power Source Battery
	Length 52mm
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 40°C
	Model Number VISIFAULT

COO (Country of Origin):: CN

Fluke Fibre Tester, 4km Operation Test Distance, 650nm Wavelength - VISIFAULT

This Fibre tester is a handheld Visual fault locator designed to speed Fibre tracing, continuity checks and Basic fault identification in industrial and field environments. It emits a bright visible red beam to locate breaks, tight bends and connector faults and offers selectable steady or pulsed output for easier identification. The unit is housed in a rugged, impact-resistant case with an energy-absorbing holster and includes a tethered protective end cap and carry case for field convenience.

Features & Benefits

• 650nm visible laser provides clear Fibre illumination for tracing
• Continuous or flashing output simplifies Fibre identification
• Up to 80h battery life from 2x AA for extended field use
• Supports single- and multi-mode Fibres up to 4 km range
• Universal 2.5mm adapter connects SC, ST, FC and FJ connectors
• Lightweight 180 g construction aids portability on site

Applications

• Suitable for verifying polarity in multi-fibre connectors such as MT-RJ
• Ideal for identifying damaged splices and defective connectors in racks
• Used for tracing individual fibres within multi-fibre cables and patch panels
• Can be used for quick continuity checks during new link installations
• Used with LC and MU SFF connectors when a 1.25mm adapter is fitted

What environmental conditions can it tolerate during operation?

It operates between 0 °C and 40 °C and withstands random vibration at 2 g across 5–500 Hz Plus a 1m drop onto corners and face.

Which connector sizes are supported without additional parts?

The supplied universal 2.5mm adapter fits SC, ST, FC and FJ

a separate 1.25mm adapter is available for LC and MU.

How is the unit powered and what is typical runtime?

It runs on two AA batteries and provides more than 80 h in continuous mode.

What safety and standards information is relevant for field use?

The light source is a Class II visible laser and the product meets the IEC and ISO standards listed for electrical equipment.