Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit

RS 제품 번호:: 123-6402
Distrelec 제품 번호:: 300-76-090
제조사 부품 번호:: FI-500
제조업체:: Fluke Networks

Fluke Networks FI-500 Single & Multimode Fibre Optic Test Kit

Subtotal (1 unit)*

₩6,132,535.50

제한된 재고

2 개 단위 배송 준비 완료
추가로 2026년 6월 04일 부터 3 개 단위 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩6,132,535.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 123-6402
Distrelec 제품 번호:: 300-76-090
제조사 부품 번호:: FI-500
제조업체:: Fluke Networks

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke Networks
	Cable Type	Single & Multimode
	Product Type	Fibre Tester
	Equipment Type	Fibre Optic Test Kit
	Connector Type	ST, LC, LC Port, FC Port, SC
	Resolution	1 μm
	Interface Type	USB
	Magnification	200
	Plug Type	3-Pin (Global)
	Battery Type	Nickel-Metal Hydride
	Battery Life	2h
	Standards/Approvals	IEC
	Weight	230g
	Height	140mm
	Length	72mm
	Power Source	Mains, Battery
	Width	44mm
	Includes	Battery, Cord, Display, Adapter
	Model Number	FI-500
	Maximum Operating Temperature	40°C
	Minimum Operating Temperature	0°C

	모두 선택
	브랜드 Fluke Networks
	Cable Type Single & Multimode
	Product Type Fibre Tester
	Equipment Type Fibre Optic Test Kit
	Connector Type ST, LC, LC Port, FC Port, SC
	Resolution 1 μm
	Interface Type USB
	Magnification 200
	Plug Type 3-Pin (Global)
	Battery Type Nickel-Metal Hydride
	Battery Life 2h
	Standards/Approvals IEC
	Weight 230g
	Height 140mm
	Length 72mm
	Power Source Mains, Battery
	Width 44mm
	Includes Battery, Cord, Display, Adapter
	Model Number FI-500
	Maximum Operating Temperature 40°C
	Minimum Operating Temperature 0°C

COO (Country of Origin):: LT

Fluke Fibre Tester, 3h Continuous Probe Battery Life, 1μm Resolution - FI-500

This Fibre tester is a compact, handheld endface inspection scope designed for Rapid Visual checks of single‑mode and multi‑mode connectors in dense patch panels and confined spaces. It combines a handheld probe with a backlit display and integrated PortBright illumination to aid port identification and endface viewing in low‑light environments, helping technicians quickly assess connector cleanliness and Basic physical condition.

Features & Benefits

• 200x magnification gives high‑detail inspection with zoom options
• 1 μm resolution enables detection of microscopic contaminants
• 320x240 backlit display provides clear live imaging for analysis
• Probe powered via USB simplifies power management on‑site
• NiMH battery provides 3 h continuous probe operation
• IEC safety standards compliance supports regulated workplace use

Applications

• Suitable for troubleshooting dense data‑centre patch panels under low light
• Ideal for inspecting Fibre patch cords and bulkhead connectors before mating
• Used with ST, LC, SC and FC ports for Visual endface checks
• Can be used for routine maintenance in automation and electronics facilities
• Suitable for single‑ and multi‑mode cable installations during commissioning

How long does it take to obtain a Sharp image of an endface?

Autofocus achieves a clear view in under a second, with a pause function to freeze the image for closer inspection.

What connector support is available for varied installation requirements?

The probe accepts screw‑on tips for common connector types including ST, LC, SC and FC and supports both patch cords and bulkhead connectors.

How is the probe illuminated for dark cabinets and panels?

Two white LEDs provide port illumination while a coaxial blue LED lights the endface

a dedicated PortBright torch helps locate ports.

How is data or software updated and exported from the unit?

Software upgrades and video output use the USB 2.0 interface, permitting firmware updates and image transfer via a USB drive.

What operating conditions affect use in workplace environments?

The instrument operates from 0°C up to 40°C with mains or battery power and includes vibration and 1m drop resilience for field use.