Fluke Networks FTK1475 Single Mode & Multimode Fibre Optic Test Kit

모든 Fibre Testers 열람하기

Subtotal (1 unit)*

₩22,241,133.20

Add to Basket
수량 선택 또는 입력
제한된 재고
  • 2 개 단위 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩22,241,133.20

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
123-6405
Distrelec 제품 번호:
300-76-116
제조사 부품 번호:
FTK1475
제조업체:
Fluke Networks
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke Networks

Cable Type

Single Mode & Multimode

Equipment Type

Fibre Optic Test Kit

Connector Type

FC Port, LC Connector, LC Port, SC, ST

Wavelengths

850 nm, 1300 nm, 1310 nm, 1550nm

Resolution

0.01 dB

Interface Type

USB

Maximum Power Measurement

10dBm

Magnification

200

Battery Type

NiMH

Battery Life

2 h

Power Source

Battery, Mains

Includes

AC Adapter/Battery Charger, FC Port, Fiber Probe and Display, LC Port, Probe Adapter Tips (1.5 mm Tip Set), Probe Adapter Tips (SC and Universal 2.5 mm Patch Cord Tip), Probe Adapter Tips (ST), Soft Carrying Case

Length

72mm

Maximum Operating Temperature

+40°C

Dimensions

6.4 x 3.2 x 1.5in

Model Number p

FTK1475

Width

44mm

Height

140mm

Plug Type

Type B - North American 3-pin

Weight

230g

Minimum Output Power

-20dBm

Minimum Operating Temperature

0°C

COO (Country of Origin):
US

Complete Fiber Verification Kit with FI-500 FiberInspector Micro


The FKT1475 is a Complete SimpliFiber Pro Verification Kit designed for contractors and network technicians who install and maintain premises networks with both multimode and single mode optical fiber. This complete kit lets you verify optical loss and power levels at 850 nm, 1300 nm, 1310 nm and 1550 nm, inspect fiber end-faces, locate cable faults, connector problems and polarity issues. This kit includes the FI-500 FiberInspector Micro.

Features and Benefits FI-500


PortBright™ a built-in flashlight illuminates dark areas and dense panels
AutoFocus for stable images in few seconds
Large display to view single-mode and multimode fiber endfaces
Includes 4 UPC tips (LC, SC, 1.25 mm and 2.50 mm)
APC tips available

FI-500 is designed to simplify the inspection process. The built-in PortBright flashlight helps you find the right port or cable. The small-profile probe fits into tight spots, and features push button controls for simple operation. AutoFocus provides a sharp view of the endface in a few seconds. While the pause button freezes the image on the crisp 320 x 240 display for more detailed inspection.

FI-500 FiberInspector Micro fills the gap between a manual scope and a fully automated inspection scope. It has the simplicity and practicality of a manual inspection scope, but with advanced features to reduce troubleshooting and inspection time.

Applications


SimpliFiber Pro Optical Power Meter and Fiber Test Kits have all the devices to successfully verify and troubleshoot optical fiber cabling systems, measure loss and power levels, and inspect and clean connector end-faces.

Supplied with

FI-500 with SimpliFiber Pro Multimode & Singlemode PMLS, VisiFault, 2 FindFibers, Cleaning kit (NFC-KIT-BOX) and 1.25 mm Swabs

FLUKE Networks Fibre Tester Kit, 21 Pieces, USB Connectivity - SimpliFiber Pro Series - FTK1475


Gear up for inspection tasks with this FLUKE Networks fibre tester kit. By combining 21 tools for checking signal stability and power loss, it lets you carry out comprehensive checks and simplifies troubleshooting. There's no need to worry about programming the tester, as it automatically adjusts to a signal's wavelength to ensure accurate readings. A large display makes checking readings on the meter a breeze. By recording results from two wavelengths at once, the kit's device makes light work of demanding testing jobs.

Features & Benefits


• Comes with portable light sources for flexible signal generation
• Includes handy inspection scope to check fibre ends for damage or debris
• Labelled push button interface for easy control
• USB connectivity for simple downloading of test data

Applications


• Server management
• Industrial automation
• Logistics industry

What kinds of fibre optic networks can I test with this product?


This set comes with the tools to handle single and multimode networks that use wavelengths of 850, 1,300, 1,310 and 1,550nm, making it a versatile fit for common fibre optic connections.

관련된 링크들