Digilent 410-308 Programming Module for use with FPGA Devices
- RS 제품 번호:
- 134-6473
- 제조사 부품 번호:
- 410-308
- 제조업체:
- Digilent
대량 구매 할인 기용 가능
Subtotal (1 unit)*
₩72,624.40
일시적 품절
- 2026년 1월 16일 부터 12 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 |
|---|---|
| 1 - 4 | ₩72,624.40 |
| 5 + | ₩71,158.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 134-6473
- 제조사 부품 번호:
- 410-308
- 제조업체:
- Digilent
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Digilent | |
| Accessory Type | Programming Module | |
| Product Type | Development Kit Accessory | |
| For Use With | FPGA Devices | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Digilent | ||
Accessory Type Programming Module | ||
Product Type Development Kit Accessory | ||
For Use With FPGA Devices | ||
Standards/Approvals No | ||
JTAG-SMT2 SMT Programming Module
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
Features
• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm
RS Product Codes
• 134-6434 JTAG-SMT2 SMT Module
• 134-6473 JTAG-SMT2-NC SMT Module (without USB connector)
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Note
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
관련된 링크들
- Digilent 410-251 Programming Module for use with FPGA Devices
- Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3
- Digilent 410-249 Programming Adapter for use with Xilinx FPGAs
- Digilent Module 410-310
- Digilent 410-372 Adapter for use with APSoC Development Board, FPGA
- Digilent Pcam 5C OV5640, PB200-358 Module for FPGA 410-358
- Digilent 410-370 Cora Z7: Zynq-7000 Development Board for ARM Development, FPGA Development
- Digilent 410-328-35 Cmod A7 Artix-7 Module