Digilent 410-249 Programming Adapter for use with Xilinx FPGAs

대량 구매 할인 기용 가능

Subtotal (1 unit)*

₩96,425.20

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2025년 12월 29일 부터 14 개 단위 배송
  • 추가로 2026년 1월 16일 부터 46 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 - 4₩96,425.20
5 +₩94,488.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
134-6458
Distrelec 제품 번호:
300-44-264
제조사 부품 번호:
410-249
제조업체:
Digilent
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Digilent

Product Type

Development Kit Accessory

Accessory Type

Programming Adapter

For Use With

Xilinx FPGAs

Standards/Approvals

No

Distrelec Product Id

30044264

COO (Country of Origin):
TW

JTAG-HS2 FPGA Programming Cable


The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC.

Features


• Compatible with all Xilinx tools

• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)

• On-board ADP123AUJZ 300mA voltage regulator

• Separate Vref drives JTAG/SPI signal voltages

• Vref can be any voltage between +1.8V and +5V

• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec

• JTAG/SPI frequency settable by user

• PC connector: MicroUSB

• JTAG connector: 0.1in 6-pin

• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec

• Fully supported by Digilent's Adept software and Adept SDK

Supported Target Devices


• Xilinx FPGAs

• Xilinx Zynq-7000

• Xilinx CoolRunner™/CoolRunner-II CPLDs

• Xilinx Platform Flash ISP configuration PROMs

• Selected third-party SPI PROMs

• Selected third-party BPI PROMs

Target Devices Not Supported


• Xilinx 9500/9500XL CPLDs

• Xilinx 1700 and 18V00 ISP configuration PROMs

• Xilinx FPGA eFUSE programming

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

Xilinx JTAG 2 x 7-pin 2mm connector adapter, USB cable

관련된 링크들