제조사부품번호

Fluke 80i-110s Current Clamp, 100 A DC Max, BNC Adapter Adapter, 100 A ac AC Max

RS 제품 번호:: 188-4130
Distrelec 제품 번호:: 176-12-955
제조사 부품 번호:: 80I-110S
제조업체:: Fluke

Fluke 80i-110s Current Clamp, 100 A DC Max, BNC Adapter Adapter, 100 A ac AC Max

Subtotal (1 unit)*

₩1,720,563.00

일시적 품절

2026년 6월 24일 부터 배송

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,720,563.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 188-4130
Distrelec 제품 번호:: 176-12-955
제조사 부품 번호:: 80I-110S
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Current Clamp
	Adapter Type	BNC Adapter
	Maximum DC Current	100A
	Maximum AC Current	100A ac
	Accuracy	± 3 % of Reading + 50 mA
	Maximum Conductor Size	11.8mm
	Cable Length	1.6m
	Connector Type	BNC
	Battery Type	IEC 6LR61
	Battery Life	55h
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Model Number	80i-110s
	Standards/Approvals	IEC 1010 and CSAC22.2
	Safety Category Level	CAT II, CAT III
	Safety Category Voltage	500V

	모두 선택
	브랜드 Fluke
	Product Type Current Clamp
	Adapter Type BNC Adapter
	Maximum DC Current 100A
	Maximum AC Current 100A ac
	Accuracy ± 3 % of Reading + 50 mA
	Maximum Conductor Size 11.8mm
	Cable Length 1.6m
	Connector Type BNC
	Battery Type IEC 6LR61
	Battery Life 55h
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Model Number 80i-110s
	Standards/Approvals IEC 1010 and CSAC22.2
	Safety Category Level CAT II, CAT III
	Safety Category Voltage 500V

COO (Country of Origin):: FR

Fluke Current Clamp, 100A Maximum AC Current, 11.8mm Maximum Conductor Size - 80I-110S

This current clamp measures AC and DC currents and outputs a proportional voltage for connection to scope, analyser or meter inputs via a BNC interface. It is intended for use alongside test tools that accept BNC connections and supports measurement of conductors commonly found in industrial and commercial electrical systems.

Features & Benefits

• Measures 0.1–100A AC or DC for broad current coverage
• High-accuracy probe ±3% of reading Plus 50mA for precise readings
• Bandwidth DC–100kHz to capture fast signals and harmonics
• Output levels 100mV/A and 10mV/A for flexible interfacing
• 1.6m cable with BNC adaptor for convenient connection to instruments
• Safety-rated CAT II 600V and CAT III 300V for specified installation categories

Applications

• Suitable for power quality analysis with oscilloscopes and analysers
• Ideal for commissioning and fault diagnosis in automation systems
• Used for load studies and harmonic measurement on inverters and drives
• Can be used for preventative maintenance on industrial electrical panels
• Used with multimeters converted to BNC inputs for portable field checks

What is the maximum conductor size the clamp accepts?

The jaw accommodates conductors up to 11.8mm diameter enabling measurements on single-core cables and small busbars.

How is the clamp powered and how long will it run between battery changes?

It operates from a single IEC 6LR61 battery and provides approximately 55h of operation under typical conditions.

Which output amplitude should I use for higher resolution on low currents?

Use the 100mV/A output setting when measuring in the 0.1–10A range to improve signal amplitude for small currents.

What environmental temperatures can it tolerate during use?

The device is specified for operation between 0°C and 50°C, suitable for most indoor industrial environments.