제조사부품번호

Fluke I310S Current Clamp, 450 A DC Max, AC/DC Adapter, 300 A ac AC Max, Voltage Output

RS 제품 번호:: 401-422
제조사 부품 번호:: FLUKE I310S
제조업체:: Fluke

Fluke I310S Current Clamp, 450 A DC Max, AC/DC Adapter, 300 A ac AC Max, Voltage Output

Subtotal (1 unit)*

₩1,028,096.80

제한된 재고

4 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩1,028,096.80

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 401-422
제조사 부품 번호:: FLUKE I310S
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Adapter Type	AC/DC
	Product Type	Current Clamp
	Maximum DC Current	450A
	Maximum AC Current	300A ac
	Accuracy	±1% + 300 mA
	Maximum Conductor Size	19mm
	Output Type	Voltage
	Cable Length	2m
	Connector Type	BNC
	Battery Type	PP3
	Minimum Operating Temperature	-10°C
	Battery Life	30h
	Maximum Operating Temperature	50°C
	Model Number	I310S
	Standards/Approvals	No
	Safety Category Level	CAT III
	Safety Category Voltage	300V

	모두 선택
	브랜드 Fluke
	Adapter Type AC/DC
	Product Type Current Clamp
	Maximum DC Current 450A
	Maximum AC Current 300A ac
	Accuracy ±1% + 300 mA
	Maximum Conductor Size 19mm
	Output Type Voltage
	Cable Length 2m
	Connector Type BNC
	Battery Type PP3
	Minimum Operating Temperature -10°C
	Battery Life 30h
	Maximum Operating Temperature 50°C
	Model Number I310S
	Standards/Approvals No
	Safety Category Level CAT III
	Safety Category Voltage 300V

COO (Country of Origin):: CN

Fluke Current Clamp, 300A Maximum AC Current, 450A Maximum DC Current - FLUKE I310S

This current clamp is a Hall-effect probe designed for non-intrusive measurement of both AC and DC currents when used with oscilloscopes, multimeters or recording instruments. It converts current into a voltage output via a BNC connection and is suitable for field and bench work where accurate waveform capture and DC measurement are required.

Features & Benefits

• ±1% accuracy Plus offset for precise measurement across ranges
• 30A/300A AC and ±45A/450A DC selectable ranges for versatility
• DC to 20kHz small-signal bandwidth for transient and steady-state capture
• Manual output zero adjust for quick baseline correction
• 2m cable with BNC output for easy connection to test equipment
• 19mm conductor aperture for single-core conductor access

Applications

• Suitable for inrush current diagnostics on motors and drives
• Ideal for waveform capture on oscilloscopes in test labs
• Used with multimeters for service and commissioning checks
• Can be used for DC current measurement in battery systems
• Used for maintenance checks in automation and control panels

What power source does it require and how long does it run?

It uses a single 9V alkaline battery and provides approximately 30 h of operation with a low-battery indicator.

How does it handle high short-duration currents?

The probe tolerates inrush events up to 600A AC rms maximum without damage when used within specified limits.

What environmental conditions can it operate in?

It functions between -10°C and +50°C and is rated for 15%–85% non-condensing humidity during operation.

How is safety addressed for measurements on live conductors?

The probe is designed for measurements on uninsulated conductors up to 300V and meets relevant IEC safety standards for use in industrial environments.

What output sensitivity and loading should be expected by instruments?

Output sensitivity varies with range from 10 mV/A to 1 mV/A and requires input impedance greater than 10 kΩ with capacitance up to 100 pF.