Fluke I30 Current Clamp, 30 A DC Max, AC/DC Adapter, 30 A ac AC Max, Current Output

모든 Current Clamps 열람하기

Subtotal (1 unit)*

₩1,279,882.50

Add to Basket
수량 선택 또는 입력
현재 액세스할 수 없는 재고 정보 - 나중에 다시 확인해 주세요.
수량
한팩당
1 +₩1,279,882.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
653-6763
Distrelec 제품 번호:
176-12-666
제조사 부품 번호:
i30
제조업체:
Fluke
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Fluke

Adapter Type

AC/DC

Product Type

Current Clamp

Maximum DC Current

30A

Maximum AC Current

30A ac

Accuracy

±1% + 2 mA

Maximum Conductor Size

19mm

Output Type

Current

Cable Length

1.5m

Connector Type

4 mm Plug

Minimum Operating Temperature

0°C

Battery Life

30h

Maximum Operating Temperature

50°C

Model Number

I30

Standards/Approvals

No

Safety Category Voltage

300V

Safety Category Level

CAT III

제외

COO (Country of Origin):
CN

Fluke Current Clamp, 20A Maximum AC Current, 30A Maximum DC Current - i30


This current clamp provides non-intrusive measurement of both DC and AC currents using Hall-effect sensing, and is intended for connection to multimeters and recording instruments in industrial and laboratory environments. It supports accurate current monitoring across a broad frequency range and operates within typical workshop temperature and humidity conditions.

Features & Benefits


• ±1% of reading ±2 mA accuracy for precise measurements
• 30 mA–30 A DC and 30 mA–20 A AC usable ranges for versatility
• Output sensitivity 100 mV/A for easy interfacing with meters
• Frequency response DC–20 kHz to capture high-frequency components
• 19mm conductor capacity enabling single-core clamp-on testing
• Battery powered for approximately 30 h with low-battery indication

**Applications**


• Suitable for troubleshooting motor-drive and inverter outputs
• Ideal for commissioning control panels and industrial automation
• Used with digital multimeters for maintenance checks on DC systems
• Can be used for field recording of transient currents in test rigs

What output connection is provided for instrument linking?


A 4mm safety connector supplies the analogue current-proportional output compatible with standard test leads.

How does ambient temperature affect measurement stability?


The temperature coefficient is ±0.01% of reading/°C, enabling predictable drift with environmental change.

What electrical safety and EMC provisions apply to this tool?


It meets Class CAT III 300V working voltage requirements and complies with EMC standards under IEC 61326-1.

What mounting or zeroing controls are available during use?


Output zero is adjusted manually via a thumbwheel to compensate for offset before measurement.

What supply and loading conditions ensure accurate readings?


Use a 9V alkaline PP3 battery and connect to instruments with input impedance greater than 10 kΩ and capacitance up to 100 pF.

Warning

Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.

Supplied with

Alkaline PP3 battery and operators manual.

관련된 링크들