제조사부품번호

Fluke i400 Current Clamp, AC Adapter, 400 A ac AC Max, Current Output

RS 제품 번호:: 520-2532
Distrelec 제품 번호:: 176-12-427
제조사 부품 번호:: Fluke i400
제조업체:: Fluke

Fluke i400 Current Clamp, AC Adapter, 400 A ac AC Max, Current Output

Subtotal (1 unit)*

₩411,118.50

재고있음

9 개 단위 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩411,118.50

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 520-2532
Distrelec 제품 번호:: 176-12-427
제조사 부품 번호:: Fluke i400
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Current Clamp
	Adapter Type	AC
	Maximum AC Current	400A ac
	Accuracy	2% + 0.06 A, 45 Hz to 400 Hz
	Maximum Conductor Size	32mm
	Output Type	Current
	Cable Length	1.5m
	Connector Type	Banana Jack
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	50°C
	Model Number	i400
	Standards/Approvals	No
	Safety Category Level	CAT IV, CAT III
	Safety Category Voltage	1000V

	모두 선택
	브랜드 Fluke
	Product Type Current Clamp
	Adapter Type AC
	Maximum AC Current 400A ac
	Accuracy 2% + 0.06 A, 45 Hz to 400 Hz
	Maximum Conductor Size 32mm
	Output Type Current
	Cable Length 1.5m
	Connector Type Banana Jack
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 50°C
	Model Number i400
	Standards/Approvals No
	Safety Category Level CAT IV, CAT III
	Safety Category Voltage 1000V

Fluke Current Clamp, 400A Maximum AC Current, 32mm Maximum Conductor Size - Fluke i400

This current clamp is a Compact AC clamp designed to work with digital multimeters to measure alternating current without interrupting circuits. It delivers an output proportional to measured current for straightforward interfacing with meters and is intended for use in demanding electrical environments where high safety ratings are required.

Features & Benefits

• Measures up to 400A while allowing continuous operation at working currents
• Output of 1mA per amp makes meter readings direct and simple
• Basic accuracy of 2% Plus 0.06A supports precise diagnostics
• Usable across 5Hz–20kHz to capture a wide range of AC waveforms
• Shrouded banana jack and 1.5m cable enable safe, flexible connections
• Rated for CATIII1000V and CATIV600V for high-voltage onsite tasks

Applications

• Suitable for plant maintenance teams performing load analysis
• Ideal for electrical contractors testing distribution circuits
• Used with multimeters for fault-finding in automation systems
• Can be used for current checks on motor control panels
• Used for monitoring current on busbars up to 32mm diameter

What conductor sizes can it clamp around?

It accepts conductors up to 32mm diameter and accommodates large busbar sizes specified as 750MCM.

How does it behave at temperatures encountered on site?

It is rated to operate safely between 0°C and 50°C for typical ambient working conditions.

What is the maximum non-destructive current it can withstand?

The device can tolerate short-term currents up to 1000A without permanent damage.

How low a current can it reliably detect?

The lowest measurable current is 1A, suitable for detecting light loads and standby currents.