FAG 624-2RSR-HLN 1 Row Ball Bearing - 4 mm ID, 13 mm OD

모든 Ball Bearings 열람하기

Subtotal (1 pack of 10 units)*

₩100,720.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 10월 05일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
팩
한팩당
한팩당*
1 +₩100,720.00₩10,072.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
312-329
제조사 부품 번호:
624-2RSR-HLN
제조업체:
FAG
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

FAG

Inside Diameter

4mm

Product Type

Ball Bearing

Outside Diameter

13mm

Race Width

5mm

Ball Material

Steel

Cage Material

Steel

Race Material

Steel

End Type

Sealed

Number of Rows

1

Static Load Rating

485N

Internal Clearance

CN

Dynamic Load Rating

1380N

Standards/Approvals

DIN 625-1

Series

62

Bore Type

Cylindrical

Limiting Speed

39000rpm

Bearing Type

Single Row Deep Groove Ball

Race Type

Deep Grooved

Flange Outside Diameter

13mm

제외

COO (Country of Origin):
CN

Schaeffler Series 62 Ball Bearing, 13mm Outside Diameter, 5mm Race Width - 624-2RSR-HLN


This ball bearing is a sealed single-row deep-groove component designed for rotational support in Compact electromechanical systems. It operates with grease lubrication and is intended for high-speed shafts where low maintenance and sealed protection are required.

Features & Benefits


• Sealed on both sides for protection against contaminants
• High permissible speed of 39,000 r/min for Rapid rotation usage
• Dynamic load capacity 1,380 N to handle substantial radial forces
• Static load capacity 485 N to withstand Peak or shock loads
• Steel sheet-metal cage reduces friction while retaining balls

**Applications**


• Suitable for precision motors in automation equipment
• Ideal for small DC and brushless motors in electronics
• Used with spindle assemblies requiring high rotational speeds
• Can be used for Compact gearboxes in electrical actuators

What shaft and housing shoulder constraints apply?


Minimum shaft shoulder diameter required is 5.8mm and maximum housing shoulder diameter allowed is 11.2mm to ensure correct axial seating.

What temperature range can it withstand during operation?


It is rated for continuous use between −30°C to 100°C when filled with the specified grease.

How does dimensional stability affect thermal conditions?


Rings are stabilised up to 120°C to limit dimensional change under elevated temperatures.

What mounting radii and chamfer dimensions are required?


Maximum fillet radius is 0.2mm and minimum chamfer dimension is 0.2mm to prevent interference with the ring edges.

관련된 링크들