SMC Vacuum Generator, 0.7 mm nozzle, -91 kPa 29 L/min, ZK2 series

RS 제품 번호:: 452-799
제조사 부품 번호:: ZK2A07K5RWA-08
제조업체:: SMC

SMC Vacuum Generator, 0.7 mm nozzle, -91 kPa 29 L/min, ZK2 series

모든 Vacuum Generators 열람하기

Subtotal (1 unit)*

₩686,556.00

제조사가 재고 비축중

2026년 7월 01일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩686,556.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

Better World

Our Better World range features products that make it easy for you to make a greener product choice you can trust. Click here to find out more.

RS 제품 번호:: 452-799
제조사 부품 번호:: ZK2A07K5RWA-08
제조업체:: SMC

사양

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SMC
	Product Type	Vacuum Generator
	Maximum Suction Flow	29L/min
	Maximum Vacuum Pressure	-91kPa
	Nozzle Diameter	0.7mm
	Series	ZK2
	Silencer	Yes
	Minimum Operating Temperature	+5°C
	Maximum Supply Pressure	0.6MPa
	Vacuum Port Size	8 mm
	Maximum Operating Temperature	+50°C
	Standards/Approvals	CE, UKCA, IEC 61131-9
	Better World Product	Yes
	Better World Claim	Saves Energy

	모두 선택
	브랜드 SMC
	Product Type Vacuum Generator
	Maximum Suction Flow 29L/min
	Maximum Vacuum Pressure -91kPa
	Nozzle Diameter 0.7mm
	Series ZK2
	Silencer Yes
	Minimum Operating Temperature +5°C
	Maximum Supply Pressure 0.6MPa
	Vacuum Port Size 8 mm
	Maximum Operating Temperature +50°C
	Standards/Approvals CE, UKCA, IEC 61131-9
	Better World Product Yes
	Better World Claim Saves Energy

COO (Country of Origin):: JP

SMC ZK2 Series Vacuum Generator, 29L/min Maximum Suction Flow, -91kPa Maximum Vacuum Pressure - ZK2A07K5RWA-08

This vacuum generator provides Compact pneumatic suction for automation and handling tasks in industrial settings. It functions as an air-driven ejector that produces negative pressure to pick up, hold or transfer components within production lines while incorporating noise reduction for quieter operation.

Features & Benefits

• Maximum supply pressure 0.6 MPa for robust pneumatic drive
• Peak suction capability of -91 kPa to handle strong holds
• Maximum suction flow 29 L/min enabling moderate throughput
• Nozzle diameter 0.7mm for focused vacuum generation
• Vacuum port size 8mm for straightforward piping connections
• Operates between 5 °C and 50 °C for typical factory environments

Applications

• Suitable for pick-and-place of electronic components in SMT processes
• Ideal for small-part transfer in mechanical assembly lines
• Used for part hold-down during inspection and test stations
• Can be used for material handling on automated conveyors

How does it perform when integrated into a Compact end-of-arm tool?

Its small nozzle and moderate flow allow concentrated suction at gripping points while the 8mm port simplifies connection to short tubing runs.

What environmental limits should operators observe?

The unit is designed for ambient temperatures from 5 °C to 50 °C and should be installed where conditions remain within this range.

How does the silencing feature impact installation near workstations?

The integrated silencer reduces exhaust noise, permitting closer placement to operators and inspection areas without introducing additional mufflers.

What supply conditions are required for consistent operation?

A regulated compressed Air source up to 0.6 MPa is necessary to maintain the specified suction and flow performance.