Fluke Test Probe, 60V, 2 mm Socket, 10A
- RS 제품 번호:
- 493-3285
- Distrelec 제품 번호:
- 140-44-269
- 제조사 부품 번호:
- TP88
- 제조업체:
- Fluke
Subtotal (1 set)*
₩72,891.00
제조사가 재고 비축중
- 2026년 7월 06일 부터 배송 준비 완료
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
Set(s) | Per Set |
|---|---|
| 1 + | ₩72,891.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 493-3285
- Distrelec 제품 번호:
- 140-44-269
- 제조사 부품 번호:
- TP88
- 제조업체:
- Fluke
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | Fluke | |
| Voltage | 60V | |
| Product Type | Test Probe | |
| Current | 10A | |
| Colour | Red, Black | |
| Probe Socket Diameter | 2mm | |
| Standards/Approvals | No | |
| 모두 선택 | ||
|---|---|---|
브랜드 Fluke | ||
Voltage 60V | ||
Product Type Test Probe | ||
Current 10A | ||
Colour Red, Black | ||
Probe Socket Diameter 2mm | ||
Standards/Approvals No | ||
제외
- COO (Country of Origin):
- US
Fluke Test Probe, 10A Current, 60V Voltage - TP88
This test probe provides a compact, insulated means to access electrical connectors and wiring within confined assemblies. It is designed to slide onto 2mm test probe sockets and to pass between Seals and multi‑pin connectors for accurate contact in low‑voltage environments.
Features & Benefits
• Rated for 10 A current handling for high‑load probing
• Tested to 60V DC for low‑voltage diagnostic tasks
• Two‑inch rigid back for penetrating tight seals
• Sharp‑point tip for reliable contact with connector pins
• Insulated body to reduce the risk of shorting adjacent conductors
• Tested to 60V DC for low‑voltage diagnostic tasks
• Two‑inch rigid back for penetrating tight seals
• Sharp‑point tip for reliable contact with connector pins
• Insulated body to reduce the risk of shorting adjacent conductors
**Applications**
• Suitable for automotive wiring-harness diagnosis in sealed connectors
• Ideal for servicing control panels in automation equipment
• Used for continuity and live checks on low‑voltage circuits
• Can be used with multimeters and test leads fitted with 2mm sockets
• Ideal for servicing control panels in automation equipment
• Used for continuity and live checks on low‑voltage circuits
• Can be used with multimeters and test leads fitted with 2mm sockets
What socket size is required to use it with test leads?
It accepts probe sockets measuring 2mm diameter and fits standard 2mm test lead terminations.
How does the probe provide protection against unintended contact?
The probe incorporates insulation around the shaft to help prevent electrical contact with neighbouring conductors during probing.
Is the probe available in different colours for easy identification?
It is supplied in red and black variants to assist colour‑coding during measurements.
Will the probe perform when used for higher current checks?
The probe is specified to carry up to 10 A, enabling it to be used for higher current measurement and load checks within that limit.
관련된 링크들
- Fluke Test Probe, 1000V, 10A
- Fluke Lantern Test Probe, 1000V, 10A
- Fluke Test Probe, 2 mm Tip, 1 kV, 600V, 2 mm Socket, 10A
- Fluke Sharp Test Probe, 12 mm Tip, 1kV, 10A
- Fluke Removable Lantern Tips Test Probe, 4 mm Tip, 1 kV, 600V, 4 mm Socket, 10A
- Fluke Test Probe, 600V, 10A
- Fluke Rounded Test Probe, 600V, 10A
- Fluke Test Probe, 1000V, 4 mm Socket, 500mA