제조사부품번호

Fluke Test Probe, 1000V, 4 mm Socket, 500mA

RS 제품 번호:: 517-4689
제조사 부품 번호:: 2435108
제조업체:: Fluke

Fluke Test Probe, 1000V, 4 mm Socket, 500mA

Subtotal (1 unit)*

₩171,280.00

제조사가 재고 비축중

2026년 9월 14일 부터 배송 준비 완료

더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.

수량	한팩당
1 +	₩171,280.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:: 517-4689
제조사 부품 번호:: 2435108
제조업체:: Fluke

참조 문서

제정법과 컴플라이언스

제품 세부 사항

제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	Fluke
	Product Type	Test Probe
	Voltage	1000V
	Current	500mA
	Colour	Red, Black
	Probe Socket Diameter	4mm
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	40°C
	Standards/Approvals	No

	모두 선택
	브랜드 Fluke
	Product Type Test Probe
	Voltage 1000V
	Current 500mA
	Colour Red, Black
	Probe Socket Diameter 4mm
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 40°C
	Standards/Approvals No

COO (Country of Origin):: GB

Fluke Test Probe, 1000V Voltage, 500mA Current - 2435108

This test probe is a handheld electrical probing accessory designed for measurement and diagnostic work with multimeters in a range of field and workshop environments. It facilitates safe contact with conductors and terminals while accommodating standard 4mm sockets and is available in contrasting red and black finishes for clear polarity identification.

Features and Benefits:

• Rated for use up to 1000V to support high-voltage measurements
• Current-handling capability of 500 mA for low-current circuits
• Probe socket designed for 4mm connections to fit common test equipment
• Operates within 0-40 °C for typical indoor field conditions
• Colour-coded red and black leads for immediate polarity recognition

Applications

• Suitable for maintenance of control panels and switchgear
• Ideal for fault-finding on low-current electronic assemblies
• Used with bench multimeters for component verification
• Can be used for on-site inspection of terminal blocks

What connector type does it interface with on measurement equipment?

It plugs into standard 4mm sockets found on most bench and handheld multimeters.

How should ambient temperature be managed during prolonged use?

Keep usage within the 0-40 °C range and avoid exposing the probe to direct heat sources to maintain performance.

What current levels can be measured safely using these probes?

The probes are specified to carry up to 500 mA continuous current in typical measurement tasks.

Are the probes suited to high-voltage diagnostic tasks?

They are rated for measurements up to 1000V, making them applicable for many high-voltage testing scenarios within that limit.

Standards

EN 61010; EN 61557-7; CAT III; 600 V