Eaton 100A Tag Fuse 76 x 359 mm 3.6kV

This tag fuse is designed to provide motor circuit protection in medium-voltage installations, supplying back-up fault clearing capability for rotating equipment. It operates at a system voltage of 3.6 kV and is intended for use where a separate protective device is required to isolate and interrupt overcurrents on motor feeders in industrial electrical systems.

• Rated for 100A to protect motors against sustained overcurrent
• Back-up fuse speed to handle short-duration fault interruption
• Conforms to IEC 60282-1 for recognised high-voltage fuse performance
• Width 76mm enabling compatibility with standard tag fuse holders
• Overall length 359mm permitting installation in typical motor protection assemblies

• Suitable for motor feeder protection in industrial automation systems
• Ideal for switchgear retrofits requiring a 3.6 kV protective element
• Used with motor control centres in manufacturing facilities
• Can be used for replacement of high-voltage tag fuses in maintenance tasks

It is specified for systems with a nominal voltage of 3.6 kV, appropriate for medium-voltage motor circuits.

Performance and testing follow the requirements of IEC 60282-1, which covers high-voltage fuses.

Allow clearance for a component width of 76mm and an overall length of 359mm when planning fuse carrier and panel layout.

Use it where a 100A continuous rating is required for motor protection and coordination with upstream devices.