Eaton 100A British Standard Fuse A3 415V ac, 73 mm

모든 Tag Fuses 열람하기

Subtotal (1 unit)*

₩81,860.00

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 11월 02일 부터 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩81,860.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

대체품

이 제품은 현재 공급 불가입니다. 아래 제품들은 당사에서 추천드리는 대체품입니다.

presentation
Eaton 100A British Standard Fuse A3 415V ac, 73 mm
RS 제품 번호
139-934

개당

₩45,880.00

RS 제품 번호:
139-940
제조사 부품 번호:
OSD100M160
제조업체:
Eaton
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

Eaton

Current Rating

100A

Product Type

British Standard Fuse

Fuse Size

A3

Voltage

415V ac

Standards/Approvals

RoHS

Fixing Centres

73 mm

Tag Width

12.7mm

High Rupture Capacity

Yes

Tag Orientation

Offset

Overall Length

94.5mm

Length

95mm

Width

26mm

Diameter

25.7mm

Height

54mm

Series

OSD

제외

Eaton Bussmann HRC Offset Tag Fuses - BS88 British Standard Fuses


Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

Features & Benefits


• The low-temperature rise enables the fuse to be suitable for high-density mounting

• Fuse links, specifically designed for the protection of equipment

• Conforms to industry standards

• Low voltage fuse

• High rupture capacity (HRC)

• Suitable for three-phase applications

• Suitable for type 2 co-ordinated applications as defined in IEC 947-4

• Low power loss, typically 20% lower than the requirements of BS 88

Why use a slotted tag fuse?


A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

Note

Eaton formerly known as Bussmann

관련된 링크들