ABB Sensor Actuator Cable

본 이미지는 참조용이오니 재확인이 필요하시면 문의해주세요.

Subtotal (1 unit)*

₩105,317.60

Add to Basket
수량 선택 또는 입력
일시적 품절
  • 2026년 1월 30일 부터 3 개 단위 배송
  • 추가로 2026년 2월 13일 부터 16 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
1 +₩105,317.60

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
733-2506
제조사 부품 번호:
2TLA020056R4000 M12-C103
제조업체:
ABB
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

ABB

Product Type

Sensor Actuator Cable

Series

Pluto

Jacket Colour

Grey

Voltage

24 V

Standards/Approvals

category 4, EN 50178, EN 61496-1, EN 61508, EN 954-1, EN ISO 13849-1, EN ISO 574, EN ISO 60204-1, EN ISO 62061, PL e, SIL 3, TÜV Rheinnd, Typ4, Typlllc

IP Rating

IP40

Vital Safety Controller, Base Unit


The Vital safety device from ABB is the heart of a new solution which makes it possible to install/connect many different types of safety device in the same safety circuit and still achieve safety category 4 in accordance with EN 954-1/EN ISO 13849-1. The Vital module is based upon a dynamic single-channel concept as opposed to conventional dual-channel safety relays. ABB have designed this unit to accommodate up to 30 dynamic sensors within the safety circuit which can be supervised by one Vital module. The Vital unit can therefore replace several safety relays. Safety components with output contacts can be connected to the Vital via low cost Tina adaptors. The Vital also has automatically or manually supervised reset selection, dual safety outputs, and an information output for reset indication and status information for PLC's.

Cost-effective cable routing/connections

Information output with two functions

LED indication of: power supply, dynamic signal and outputs

Detachable connector blocks

Two NO safety outputs

Manually supervised or automatic reset

Can accommodate long cable lengths

Standard width: 22.5 mm

IP40 protection class rating

A mechanical life of >107 operations

Safety category 4, according to EN 954-1/EN ISO 13849-1 dynamic safety circuit

Note

Unused ports on the Tina 4A and 8A must be blanked by using a Tina 1A blanking plug.

Approvals

UL, CSA

관련된 링크들