제품 정보를 선택해 유사 제품을 찾기

모두 선택	제품 정보	값
	브랜드	SKF
	Inside Diameter	25mm
	Product Type	Radial Shaft Seal
	Outside Diameter	37mm
	Seal Type	Rotary Shaft Seal
	Thickness	5mm
	Seal Material	Nitrile Rubber (NBR)

Datasheet - 25X37X5 HMSA10 RG

COO (Country of Origin):: CN

SKF Radial Shaft Seal, 25mm Inside Diameter, 5mm Thickness - 25X37X5 HMSA10 RG

This radial shaft seal provides a sealing solution for rotating shafts, designed to prevent fluid leakage and exclude contaminants in mechanical assemblies. It is intended for use where a Durable elastomeric contact with a rotating shaft is required, serving as a barrier between lubricated interiors and external environments.

Features and Benefits:

• Nitrile rubber construction resists common oils and lubricants
• Rotary lip design maintains continuous contact with shaft surfaces
• Thin cross-section minimises axial space requirements
• Robust sealing behaviour reduces shaft-side contamination ingress

Applications

• Suitable for sealing rotating motor shafts in Compact drives
• Used with gearboxes requiring oil retention on shafts
• Ideal for light industrial pumps with rotary Seals
• Can be used for general-purpose rotating equipment protection

What material is the sealing element MADE from?

The primary elastomer is nitrile rubber which provides resistance to petroleum-based oils.

What seal geometry suits small-diameter shafts?

The product has a Compact form intended for shafts with a 25 mm inner diameter.

How does the seal fit into housings relative to the shaft?

It is manufactured to Interface between the rotating shaft and housing bore, with an outer diameter sized for press-fit installation.

What thickness does the sealing lip present across the section?

The radial cross-section thickness is specified as 5 mm.

What outer diameter should the housing accommodate?

The housing bore should accept an outer diameter of 37 mm.

SKF Nitrile Rubber (NBR) Radial Shaft Seal, 25 mm ID, 37 mm OD, 5 mm