SKF Nitrile Rubber (NBR) Radial Shaft Seal, 25 mm ID, 62 mm OD, 10 mm

모든 Seals 열람하기

Subtotal (1 pack of 10 units)*

₩40,640.00

Add to Basket
수량 선택 또는 입력
재고있음
  • 추가로 2026년 10월 12일 부터 60 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량
한팩당
한팩당*
10 +₩4,064.00₩40,640.00

* 참고 가격: 실제 구매가격과 다를 수 있습니다

RS 제품 번호:
266-9075
제조사 부품 번호:
25X62X10 HMSA10 RG
제조업체:
SKF
제품 정보를 선택해 유사 제품을 찾기
모두 선택

브랜드

SKF

Product Type

Radial Shaft Seal

Inside Diameter

25mm

Outside Diameter

62mm

Seal Type

Rotary Shaft Seal

Thickness

10mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Radial Shaft Seal, 25mm Inside Diameter, 10mm Thickness - 25X62X10 HMSA10 RG


This radial shaft seal provides a sealing Interface for rotating shafts, designed to prevent fluid leakage and limit contaminant ingress in rotary applications. It is constructed from nitrile rubber suitable for oil-contact environments and configured for use where a durable, elastic sealing lip is required around a rotating shaft.

Features and Benefits:


• Nitrile rubber composition offers resistance to oil exposure
• Rotary seal form maintains a dynamic contact surface for rotating shafts
• Robust 10mm cross-section supports axial stability during operation
• Precision-fit inner diameter reduces axial movement on shaft
• Defined outer diameter ensures consistent housing fit and retention

Applications


• Suitable for automotive drivetrain sealing tasks
• Used with gearbox assemblies requiring oil containment
• Ideal for general industrial rotating shaft installations
• Can be used for replacement radial repair in maintenance work
• Suitable for hydraulic pump shaft sealing arrangements

What material properties affect oil compatibility?


The sealing element is MADE from nitrile rubber which provides compatibility with mineral oils and typical lubricants used in rotating equipment.

How should the part be selected for interference fit?


Choose a housing bore that matches the specified outer diameter to achieve proper press-fit retention and prevent radial extrusion.

What inspection should be performed before installation?


Verify shaft surface finish and roundness against expected sealing requirements and ensure there are no nicks or corrosion on the 25 mm shaft contact area.

How does the seal respond to axial shaft movement?


The 10 mm section thickness contributes to axial stiffness that helps maintain lip contact while accommodating limited axial displacement.

What operational condition determines seal replacement timing?


Monitor for increased leakage or lip wear during routine maintenance intervals and replace when sealing performance degrades.

관련된 링크들