SKF Nitrile Rubber (NBR) Radial Shaft Seal, 25 mm ID, 46 mm OD, 7 mm
- RS 제품 번호:
- 266-9062
- 제조사 부품 번호:
- 25X46X7 HMSA10 RG
- 제조업체:
- SKF
Subtotal (1 pack of 10 units)*
₩32,640.00
재고있음
- 추가로 2026년 10월 12일 부터 10 개 단위 배송
더 자세한 내용이 필요하신가요? 필요한 수량을 입력하고 '배송일 확인'을 클릭하면 더 많은 재고 및 배송 세부정보를 확인하실 수 있습니다.
수량 | 한팩당 | 한팩당* |
|---|---|---|
| 10 + | ₩3,264.00 | ₩32,640.00 |
* 참고 가격: 실제 구매가격과 다를 수 있습니다
- RS 제품 번호:
- 266-9062
- 제조사 부품 번호:
- 25X46X7 HMSA10 RG
- 제조업체:
- SKF
사양
참조 문서
제정법과 컴플라이언스
제품 세부 사항
제품 정보를 선택해 유사 제품을 찾기
모두 선택 | 제품 정보 | 값 |
|---|---|---|
| 브랜드 | SKF | |
| Inside Diameter | 25mm | |
| Product Type | Radial Shaft Seal | |
| Outside Diameter | 46mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 7mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 모두 선택 | ||
|---|---|---|
브랜드 SKF | ||
Inside Diameter 25mm | ||
Product Type Radial Shaft Seal | ||
Outside Diameter 46mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 7mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 25mm Inside Diameter, 46mm Outside Diameter - 25X46X7 HMSA10 RG
This radial shaft seal provides a rotating shaft sealing solution for oil and fluid retention in mechanical assemblies. It is designed to prevent leakage and contamination on shafts where a dynamic rotary Interface requires a resilient contact lip. The component is suitable for installations requiring a Compact cross-section and elastomeric compatibility with common lubricants.
Features and Benefits:
• Nitrile rubber material offers resistance to oil-based fluids
• Rotary lip design maintains continuous shaft contact
• 7mm section thickness delivers consistent axial sealing force
• 25mm inside diameter enables installation on small shafts
• 46mm outside diameter secures press-fit into housings
• Rotary lip design maintains continuous shaft contact
• 7mm section thickness delivers consistent axial sealing force
• 25mm inside diameter enables installation on small shafts
• 46mm outside diameter secures press-fit into housings
Applications
• Suitable for sealing drive shafts in small gearboxes
• Used with rotary actuators in industrial equipment
• Ideal for maintenance replacement on pump shafts
• Can be used for motor and gearbox output shafts
• Used for sealing rotating shafts in hydraulic components
• Used with rotary actuators in industrial equipment
• Ideal for maintenance replacement on pump shafts
• Can be used for motor and gearbox output shafts
• Used for sealing rotating shafts in hydraulic components
What material compatibility does the seal provide?
The elastomer is nitrile rubber which performs well with mineral oils and many grease formulations.
How does the seal locate within a bore during assembly?
The outer diameter provides an interference fit so it sits firmly in the housing bore.
What shaft size must be used for correct installation?
The internal diameter requires a 25mm shaft for proper radial contact and sealing.
How thick is the sealing section that controls axial compression?
The seal has a 7mm thickness which determines its axial squeeze and lip load.
What housing bore dimension matches the external diameter?
The external diameter is 46mm for matching the receiving bore size.
관련된 링크들
- SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 46 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 46 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 46 mm ID, 65 mm OD, 10 mm
- SKF Nitrile Rubber (NBR) Seal, 46 mm ID, 59 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 40 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 38 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 12 mm ID, 25 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal, 25 mm ID, 47 mm OD, 7 mm